SJ-T8-LED tube light, 15W product size: 30mm*1200mm LED quanity:SMD 3528 ,240 pcs Certificate: CE, RoHS, FCC Warranty: 3 yea

SJ-T8-LED tube light , 15W

Product specification:

Item No.	SJ-T8-LED tube light , 15W
Dimension(M)	1200m*30mm
Raw material	Aluminium + PC
LED type	SMD3528
LED quantity	240 pcs
Color temperature	3000-65000k
Lumens	1275lm
Operation Frequency	50-60Hz
Render index	≥75
View angle	180 degree
Light cap	G13
Certificate	CE, RoHS, FCC
Warranty	3 years

Package and delivery

Package: neutral package or special request for client .

Delivery: delivery by air plane or sea transportation.

 

Applications:

Bus, shuttle, railcar passenger interiorsUninterrupted emergency lightingFocused reading and Task lightingInterior design usesCloset illuminationCove lightingMarine recreation applicationsConcealed accent lightingEdge lightingUnder counter lightingCubicle, workbench lightingRecreational vehicle interiors

 

 

A:1198mm±1mm   

B:1201mm±1mm      

C:30mm±0.5mm

 

TURN OFF MAIN POWER SWITCH BEFORE DOING ANY WORK

 

1. Remove old standard fluorescent lamps

2. Open fixture cover shield

3. Remove or bypass existing ballast by unscrewing wire caps from AC line input to ballast. Remove starter cap if one           exist. If you don not remove ballast and starter, you will damage LED fluorescent lamps and VOID the warranty.

4. Before cutting existing wires from the end lamp sockets to ballast, make sure you cut wires closest to ballast. This allows enough wire length to reach the AC input wires. Dress all cut wires, so there is enough copper wire showing to twist wires together.

5. Twist one set of wires from a pair of lamp sockets on the same side of fixture to black input wire and apply electrical cap. Twist the second set of wires from opposite side lamp sockets to white input wire and apply electrical cap.

6. Install shield cover back on main light fixture.

7. Install new LED fluorescents like standard T8

fluorescent lamps.

8. Turn main power on and lamps are ready for use.