Ads by Google
CD1/MD1 electric wie rope hoist briefly introduction
TYPE CD1/MD1 wire-rope electric hoist is a kind of small-lifting equipment.It can mounted on single beam overhead cranes.Gantry Cranes, Jib Type CD,electric hoist as only one normal speed which can satisfy normal application. It is widely used in factories, mines, harbours, cargo storage area and shops,essential in raising working efficiency and improving working conditions.
CD1/MD1 components detailed introduction
1. Reducer
Third-class dead axel helica gear transmission structure is adopted,; gear and gear axel are made of heat treated alloy steel;case and case cover with precise assembly and good seal are made of quality cast iron.The reducer is independent, so its easy to load and unload it.
2. Control Box
It has device with up an down stroke protection of break off limiter and can cut off main circuit in an emergency,which ensures safe operation of electric block.Electric elements are of long service life and operational safety.
3.Steel Wire Rope
It uses GB1102-74(6*37+1) hoist steel wire rope which is durable in use.
4. Conical Motor
The hoist motor uses conical motors of relatively stronger starting torque to brake asynchronous motor and does not need extra arrester. The motor s load duration factor is 25%; the motor uses B frade and F grade insulation and its grade of protection isIP44/IP54.
5. Button Switch
Its hand-operated, easy to handle,and has two modes of cord operation and cordless remote control
6.Gear
by adopting Japanese technology,they are innovated symmetrical arrayed high -speed synchronous gears, and are made from international standard gear steel.Compared with common gears ,they are more wearable and steadier, and more laborsaving.
7.Chain
Adopts high strength chain and high precision welding technology,meet ISO3077-1984 international standard;fits for gusty overload work conditions;takes your hands a better feeling multi-angle operation.
8.Hook
Made of high-class alloy steel,it has high strength and high security; by using new design,weight will never escape.
9.Component
Main components are all made of high-class alloy steel,with high precision and security.
10. Framework
Slight design and more beautiful; with less weight and smaller work area.
11. Plastic Plating
By adopting advanced plastic plating technology inside and outside,it looks like a new one after years of operation.
12.Encloser
Made of high-classed steel,more firmly and dexterous.
Components material quality introduction
1.Electrical equipment:Schneider Control box material:Q235B
2.Motor:Nanjing special electric
3.Bearing:Ha‘erbin Bearing
4.Gear:20Chromium manganese titanium,famous Dongtai gear
5.Hook:40 chrimium forge
6.Wire rope:Guizhou Julong limited liability company
7.Transmission shaft:45#quenched and tempered steel
8.Cover and coiling block:thicken steel plate
CD1 electric hoist technical parameters
| Model | CD1-0.25T | CD1-0.5T | CD1-1T | CD1-2T | CD1-3T | CD1-5T | CD1-10T | CD1-16T | CD1-20T |
| Capacity (T) | 0.25 | 0.5 | 1 | 2 | 3 | 5 | 10 | 16 | 20 |
| Standard lifting height (m) | 3-9 | 6-12 | 6-30 | 6-30 | 6-30 | 6-30 | 9-30 | 9-18 | 9-18 |
| Lifting Speed (m/min) | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 |
| Running Speed (m/min) | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 |
| Wire rope type | 6X9 | D-6X37+1 | D-6X37+1 | D-6X37+1 | D-6X37+1 | D-6X37+1 | D-6X37+1 | 6X37+1 | 6X37+1 |
| I-beam track type | 16-22b | 16-28b | 16-28b | 20a-32c | 20a-32c | 25a-63c | 25a-63c | 45a-63c | 50a-63c |
| Loop track minium radius (m) | 0.8 | 1.5 | 1.5-4 | 2-4 | 2-4 | 2.5-5 | 2.5-9 | 3-4.6 | 3-4.6 |
| Power supply | 220V-440V,3phase,50/60HZ | ||||||||
| Working Duty | Mid M3 | Mid M3 | Mid M3 | Mid M3 | Mid M3 | Mid M3 | Mid M3 | Mid M2 | |