Hot sales HDPE granule
1. Application
HDPE (high density PE) is used in products and packaging such as plastic bags, milk jugs,
detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat,
polyethylene monofilament, woven yarn and make cable wire-insulating etc.
LDPE is widely used for manufacturing various containers, dispensing bottles, wash bottles, tubing, plastic bags for computer components, and various molded laboratory equipment. Its most common use is in plastic bags.
2. Technical property
Grade: Film, injection, blow, extrusion grade
HDPE
HDPE material Property | Typical Value | |
Density g/cm 3 | 0.964 | |
Melt flow Rate g/10min | ≤8 | |
Tensile yield strength MPa | ≥33.0 | |
Flexural modulus Mpa | ≥965 | |
Elongation@ break % | ≥650 | |
Impact Embrittlement temperature °C | MAX -118 | |
Dielectric Constant | 100KHZ | 2.32 |
1MHZ | 2.31 | |
Loss Tangent | 100KHZ | MAX 0.0001 |
1MHZ | MAX 0.0001 | |
Volume resistivity OHM-CM | MIN 1x10 15 |
LDPE
Item | Test condition | Test method | Value | Unit |
Density | ASTM D-1505 | 0.917-0.921 | g/cm3 | |
MFI | ASTM D-11238 | 1.5-2.5 | g/10min | |
Mass Fraction of Extractable Substances | ASTM D-790A | <0.6 | % | |
Elongation at break | ASTM D638 | ≥600 | % | |
Tensile strength at Break | ASTM D-638 | ≥11.3 | MPa |
3. Packing: 25KG/ pp woven bag
4. Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air. During transportation, the material shouldnot be exposed to strong sunlight or rain and should not be transported together with sand soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and filmable substance is strictly prohibited.
More information, pls contact me---cathy peng
Skype ID: viviane9816
TEL:86-27-86371632 Fax: 86-27-86371597
Hot sales HDPE granule