Ads by Google
Soybean Combine Harvester
Technical parameters:
| 1. Use of automatic formed floating cutter to ensure lowest harvesting height. | ||||||||
| 2. Application of double rollers. | ||||||||
| 3. Use of re-threshing device obtains low loss rate and high cleanliness | ||||||||
| 4. Short time in the machine and shorter threshing roller,increase the quality, colour and luster. | ||||||||
| 5. Stem and skin collected separately,more systematic. | ||||||||
| 4L-1.0 soybeen combine harvester | ||||||||
| MAIN SPECIFICATION SHEET | ||||||||
| Type | Wheel self-propelled | |||||||
| Model | 4L-1.0 | |||||||
| Cutting width | mm | 1950 | ||||||
| Feed | kg/s | 0.5~1.0 | ||||||
| Diesel engine | Model | 4L68 | ||||||
| Power | kw | 40 | ||||||
| Rotate speed | r/min | 2600 | ||||||
| Average oil consumption per hectare | Kg/hm² | ≤14.5 | ||||||
| Working productivity | Hm²/h | 3~7 | ||||||
| Weight | kg | 2850 | ||||||
| Dimension | Length | mm | 6210 | |||||
| Width | mm | 2630 | ||||||
| Height | mm | 2930 | ||||||
| Ground clearance | mm | 315 | ||||||
| Header | Reel type | Spring-tined | ||||||
| Reel diameter | mm | Φ900 | ||||||
| Reel bat | Pieces | 5 | ||||||
| Cross auger type | Screw auger,eccentric | |||||||
| extensible link | ||||||||
| Cross auger diameter | mm | Φ500 | ||||||
| Clearance between auger and bed plate | mm | 12-20 | ||||||
| Cutter bar stroked | mm | 76.2 | ||||||
| Conveyer | Type | Flat belt raked tine,forced feed | ||||||
| Width | mm | 400 | ||||||
| Threshing drum | Type | Tangential flow rasp bar | ||||||
| Diameter | mm | Φ450 | ||||||
| adjustable | ||||||||
| Length | mm | 385 | ||||||
| Concave | Type | Grid | ||||||
| Angle | (°) | 72 | ||||||
| Separation area | m² | 0.13 | ||||||
| Sieves | Type | Double shaker+fan+re-threshing | ||||||
| Above sieve | m² | 0.48 adjustable | ||||||
| Bottom sieve | m² | 0.6 adjustable | ||||||
| Fan | Type | Retroverted straight-blade centrifugal | ||||||
| Diameter | mm | Φ420 | ||||||
| Grain auger diameter×thread pitch | mm | Φ125×115 | ||||||
| auger diameter×thread pitch | mm | Φ125×115 | ||||||
| Grain tank | m3 | 0.75 | ||||||
| Chassis | Type | 4×2 wheel | ||||||
| Track front | mm | 1300 adjustable | ||||||
| Track rear | mm | 1270 adjustable | ||||||
| Gear case Model | 3×2+1 | |||||||
| Wheelbase | mm | 1985 | ||||||
| Front wheel | Type | 9.5-24 | ||||||
| Rear wheel | Type | 6.0-16 | ||||||
| Tire pressure | Mpa | Front0.28 Rear0.36 | ||||||
| Oil tank capacity | L | 47 | ||||||
| Operator | One person | |||||||
| Qty'40HQ | set | 2 | ||||||