Welcome to ECOL - Join Free - Sign In
led sopt light 5w with CE&RoHS
led sopt light 5w with CE&RoHS
Supplier Info
[China Supplier]
Contact Person : Mr. Lee Leo
Tel : 86-760-88759400
Fax :
Product Detail
5W high power led spotlight 1.Energy saving 85% 2.Long lifespan:50,000h 3.90lm/W, PF:0.95 3) Certificate:CE RoHS

LED spot light specification: 

Model

WL-50501

Input Voltage

12V. AC85-265V

Watt

5W

LED Qty

3pcs

Lumen270lm
CCT2700-7500K
ColorsWW/PW/CW
CRI>85ra
Working Temp-20° to +55°
Working Frequency50~60HZ
Beam angle30degree
Drive current350MA
Size95X100mm
Lifespan50 000hours
Warranty2years
Certificate

CE& RoHS

 LED spot light  advantages: 

1.LED power: 3W.

2.Great energy-saving effect, save energy by 70% comparing with traditional lamps

3.Long lifespan, can be used for 50,000 hours

4.Its working voltage (12V,AC85V-265V) can overcome the electrical grid, noise pollution and unstable light caused by ballast

5.High-purity Aluminium shell, heat sink and hanging hook

6.Lamp surface treated with anodization, corrosion-resistant, artistic appearance.

7.Lighting intensity is uniform and without glare.

8.Corrosion, dust, water, and shake-resistant, no leakage or poison, green environmental protection.

  

  Directions For Use

1.Mounting Procedures:1.1 Disconnect the power supply before installation, to ensure safety1.2 Insert bulb into the lamp holder, rotate the bulb clockwise until bulb cap touch the bottom of the lamp holder.

 

2.Environment Requests2.1 Operating temperature:-20°C~+50°C2.2 Storage temperature:-25°C~+60°C2.3 Operating humidity:30%~85%2.4 Storage humidity:10%~90%2.5 Storage environment: Indoor, ventilation and there should not have any corrosive gases.

Caution:

To reduce the risk of fire, electric shock, or injury to persons:1.Never touch the lamps with bare hands to avoid a thermal burn when they are used.2.Use in dry location only, never use where water may drop on the lamp. This is extremely dangerous because it may cause an electric leak.3.No internal parts are available to be repaired in the lamp. Serious accidents may occur if a repaired lamp is installed.4.To avoid injury to persons or damage to the lamp, make sure that the lamp is firmly installed into the lamp holder. 5.Never use in front of or over a room heater. Do not switch on and off frequently. Switching on and off may shorten the lamp service life.6.To avoid eye injury, do not look directly at strong light source

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.