Based on the water flow directions,any of the cooling and heating systems will have the fitting function in the platic molds.

 Cooling circuit plugs with NPT,plastic mould part feature:

How to use it:

1 When installing into molds,please make sure the space is at least 0.1mm wider than cooling circuit plugs.

2 If there is no specific setting for the coling circuit plugs:first relesae,then using the air spray to reset.

Theory:

According to sloping method,the O-Ring and springs will enlarge to fit the cooling circuit plugs.

Pressure capacity:

Using:

8mm cooling circuit plugs for over 16kg/cm2

10mm cooling circuit plugs for over 17kg/cm2

12mm cooling circuit plugs for over 19kg/cm2

Specialty:

1 No tapping,no rust.

2 Can be adjusted for tightness

3 Can be placed at any water path and moved accordingly.

4 Can be cooling down or heating up by water or oil.

5 Under normal operating temperature:-5~+135°C.

6 Special operating temperature:-10~+280°C .

Cooling circuit plugs,Mold components