Oil Field Pumping Unit Gear Box
It is produced by customer's drawing or sample.
Gear Specification Survey (Composite Table)
Type Gear | Min. Dia. | Max. Dia. | Face | DP/Module | Max. AGMA Quality |
Bevel Gears | Dia.10mm(0.40") | Dia.1,500mm(59") | 250mm(10") | DP 0.668 / M38 | Number 9-11 |
Chevron Gears |
| Dia.8,000mm(315") | 2,500mm(100") | DP0.423 / M60 | Number 9 |
Forged Gears | Dia.10mm(0.40") | Dia. 200 mm(8") | 90mm(3.54") | DP25.4-2.54 / M1-10 | Number 9-10 |
Ground Gears | Dia.10mm(0.40") | Dia. 3,500mm(138") | 1,200mm(47") | Dp50-0.725/M0.5-35 | Number 11-13 |
Helical Gears | Dia.20mm(0.80") | Dia.1,500mm(78") |
| DP25.4-1.27/ M1-20 | Number 9-10 |
Herringbone Gears |
| Dia.8,000mm(315") | 2,500mm(100") | DP0.423 / M60 | Number 8 |
Internal Gears | Dia.30mm(1.18") | Dia.2,900mm(114") | 250mm(10") | DP 1.58/ M16 | Number 9-10 |
Miter Gears |
| Dia.1,500mm(59") | 250mm(10") | DP0.668 / M38 | Number 9 |
Pinions |
| Dia.500mm(20") | 250mm(10") | DP 3,175 / M8 | Number10 |
Planetary Gears | Dia.20mm(0.80") | Dia.500mm(20") |
| DP25.4-2.116/M1-12 | Number 9-11 |
Plastic Gears - Cut |
|
|
|
|
|
Powder Metal Gears |
|
|
|
|
|
Racks |
| Length: 7,000mm(275") |
| DP0.423 / M60 | Number 9-10 |
Ring Gears | Dia.30mm(1.18") | Dia.8,000mm(315") |
| DP25.4-0.5 / M1-50 | Number 8-9 |
Serrations | Dia.30mm(1.18") | Dia.200mm(7.87") | 900mm(35.4") | DP25.4-3.175/M1-8 | Number 9-11 |
Spiral Bevel Gears | Dia.30mm(1.18") | Dia.1,200mm(31.4") |
| DP12.7-1.88/M2-13.5 | Number 9-11 |
Spline Shafts | Dia.30mm(1.18") | Dia.200mm(7.87") | 900mm(35.4") | DP25.4-3.175/M1-8 | Number 9-11 |
Sprockets | Dia.15mm(0.59") | Dia. 1,250mm(49") |
|
|
|
Spur Gears | Dia.1mm(0.04") | Dia.8,000mm(315") | 2,500mm(100") | DP160-0.5/M0.15-50 | Number 9-10 |
Dia.10mm(0.40") | Dia.3,500mm(137") | 1,200mm(47") | DP50-0.725/M0.5-35 | Number 11-13 | |
Straight Bevel Gears | Dia.10mm(0.40") | Dia. 200 mm(8") | 90mm(3.54") | DP25.4-2.54/M1-10 | Number 9-10 |
Dia.10mm(0.40") | Dia.1,500mm(59") | 250mm(10") | DP25.4-0.668/M1-38 | Number 9-10 | |
Dia.20mm(0.80") | Dia.500mm(20") |
| DP25.4-2.54/ M1-10 | Number 11 | |
Worms |
|
|
|
|
|
Worm wheel |
| Dia.5.000(196") |
| DP0.635/M40 | Number 9-10 |
Pictures of products are used to show our capabilities. With the exception of certain models of sow molds and dross pans designed by ourselves, products shown in the pictures are supplied to customers under “contract manufacturing” per the drawings and specifications from them. We do not sell any of these products to any third party.
Our Products & Services: * MOULD PROCESS Green sand mold, Resin bonded sand mold, Lost foam, Investment
* CASTING METALLURGY STEEL: carbon, alloy & stainless IRON: gray & ductile Non-ferrous metal
* FORGING PROCESSOpen Die and Close Die
* FORGING METALLURGY Carbon and low alloy steels
* HEAT TREATMENT Anneal, Normalize, Quench & Temper, Case Hardening
* SECONDARY OPERATIONS: Pre-Machining, Final Machining, Painting, Plating
* NDT INSPECTION Ultrasonic, Radiography, Magnetic Particle, Liquid Penetrant
* DIMENSIONAL INSPECTION, VISUAL INSPECTION AND OTHER SPECIAL INSPECTIONS REQUIRED TO INSURE PROPER ASSEMBLY.
Our commitment to customers is value in terms of product integrity, delivery, service and price. We are able to fulfill this commitment because our management, our employees and our suppliers share the common goal of value to the customers. We believe that meeting our commitment generates wealth for both our customers and for our company.
Oil Field Pumping Unit Gear Box