SS-BF Series
Fully encapsulated Constant foil gages with modified phenolic backing.Offering both self-temperature and creep compensations. With high accuracy,good stability and simple application,suitable for Class 0.02 transducers.
SS-ZF Series
Fully encapsulated Karma foil gages with modified phenolic backing.Offering both self-temperature (or elastic modulus) and creep compensations.With high accuracy and excellent stability over a wide temperature range,suitable for Class 0.02 transducers, especially suitable for DC/AC electronic weighing instruments.
SS-BA or BAM Series
Fully encapsulated Constantan(or karma) foil gages with polyamide backing or thin polyamide film balking self-temperature and creep compensations.With high elongation, excellent heat resistance and wide temperature range.Primarily intended for both precision stress analysis and normal accuracy transducers with temperature up to 150 .
SS-BHB Series
Fully encapsulated Constantan or karma foil gages with glass fiber reinforced epoxy backing.Offering both self-temperature for elastic modulus and creep compensations.With high accuracy and excellent stability over a wide temperature range and moisture resistant capability,suitable for class 0.02 transducers,especially suitable for DC/AC electronic weighing instruments.
Specification | SS-BF Series | SS-BA Series | SS-ZF Series | SS-BHB Series | |||
Resistance | 350,650,1000 | ||||||
Resistance Tolerance | ≤±0.1% | ||||||
Gage Factor | 2.00~2.20 | 1.86~2.20 | 1.86~2.40 | ||||
Dispersion of Gage Factor | ≤±0.1% | ||||||
Strain Limit | 2.0% | ||||||
Fatigue Life | ≥107 | ≥108 | |||||
STC Code | 911162327 | ||||||
EMC Number |
| M23 | |||||
Temp. Range(0C) | -3080 | -30150 | -3080 | ||||
Lead Wire Form
| C(Omissible)X DFUX BXQ G | X(Omissible)C DFUX BXQ G | C(Omissible)XDFUXBXQG | ||||
Standard Lead Wire Soldering Form | 1. SS-BQSS-BASS-ZF Series strain gages and KABACABCCBCCFDAA-W HA-W patterned gages are soldered with column lead wires with 30± 3mm long. 2. SS-BESS-BFSS-RNFSS-RBF series strain gages are soldered with belt lead wires. Except HA patterned gages is with 25± 2mm lead wire, the others are all with 30± 3mm wire. Please define your special requirement of lead wires in your order per our Designation System. |
Strain Gages Used for High Precision