Steam Flow Meter Natural Gas Flow Meter Suitable to measure dirty fluids Low requirement for straight pipe

Anjun Steam Flow Meter Gas Flow Meter Steam Gas with CE mark

V-cone flow meter can be used to measure flow of fluid, two-phase medium (moisture, condensate etc), dirty medium (coke-oven gas, GFG, natural gas, raw oil etc) and so on.

Technical Features:

Low installation requirement: 0 ~ 3D for upperstream and 0 ~ 1D for downstreamTurndown ratio: 10:1Low pressure loss: pressure loss is just 1/3 ~1/5 of that of orifice plate for same   βAbrasion resistance: vacuum will be produced after streamlined cone restriction, avoiding cone from wearing outNo block, no adherence: due to the contour of the V-cone not allow for area of stagnation where debris, consensation or particles from the fluid could accumulateExcellent repeatability:  the V-cone primary element exhibits excellent repeatability of + 0.1%Long term stability: β ratio with no change for long term provide high accuracy for long timeSignal stability: signal fluctuation is 1/10 of that of orifice plateHigh accuracy: + 0.5%

Technical Specifications:

Accuracy: ±0.5%Repeatability: ±0.1%Rated Pressure: ≤16MPa, Maximum ≤42MPaOperating Temperature: -40 ~ 700oCAmbient: -40 ~ 65oCInstallation Requirement: 0 ~ 3D for upperstream      0~1D for downstreamTurndown Ratio: 10:1Medium: Gas/ LiquidStructure type: Embeded V-Cone Flowmeter/ Braced V-Cone Flowmeter/ Inserted V-Cone FlowmeterMaterial: Kinds of metalFlange Standard: As required

Anjun Steam Flow Meter Gas Flow Meter Steam Gas with CE mark