1. Carbon monoxide(CO) detection 2. More than five years lifetime 3. Provide 1x analog out 4. RS485 optional

                                                

                                        Application for BAS carbon monoxide transmitter

CO Measurement
Gas detected	Carbon monoxide
Sensing element	Battery operable electrochemical sensor
Gas sample mode	Diffusion
Warm up time	1hour (first time)
Response Time	Within 60 seconds
Signal Update	1s
CO Measuring Range	0~100ppm(default) 0~200ppm/0~500ppm   selectable
Accuracy	<±1ppm (at 20±5°C/ 50±20%RH)
Stability	±5% (over 900 days)
Electrical
Power Supply	24VAC/VDC
Consumption	1.5 W
Wiring connections	5 terminal blocks (max.)
Outputs
Linear analog output	1x0~10VDC/4~20Ma selectable in order
D/A resolution	16 bit
D/A conversion accuracy	0.1ppm
Modbus RS485 Communication interface	Modbus RS485 interface 9600/14400/19200(default), 28800 bps, 38400 bps (programmable selection), 15KV antistatic protection
General Performance
Operation temperature	0~60°C(32~140°F)
Operation humidity	5~99%RH, non condensing
Storage conditions	0~50°C(32~122°F)
Net Weight	190g
Dimensions	100mm×80mm×28mm
Installation standard	65mm×65mm or 2”×4” junking box
Housing and IP class	PC/ABS fireproof plastic material, protection class: IP30
Compliance	EMC Directive 89/336/EEC

Features:

1)Wall mounting, real time detect CO level with measuring range of 0~100ppm/0~500ppm.

2)Electrochemical sensor which offer several advantages over traditional electrochemical sensors.

3)With a long life, good long term stability, and high accuracy, the CO sensor is environmentally friendly without risk of electrolyte leakage.

4)With simple calibration

5)The special design of easy sensors replacement makes customers replace sensor easily by themselves

6)Full time CO level detection, even the slightest leak can be detected

7)One analog output with the linear relationship between CO gas concentration

8)Internal microprocessor control

9)Special built-in Self-Zero Correction algorithm. 

10)RS-485 communication interface  optional with 15KV antistatic protection, independent address setting

Application:

1)Residential and commercial CO detectors and transmitters

2)Ventilation control for indoor parking garages

3)Recreational vehicle CO detectors

4)Kitchen rooms and restaurants

5)Freezing machine rooms and other places where air quality is easy to worsen

Application for BAS carbon monoxide transmitter