D-Series garage door opener CE certificates approved by Bureau Veritas Group(France).

ABOUT ETDOOR

ET Technology established in 1998 in Xiamen and started as a agent of Australian company.We moved to Wuxi in 2002, and mainly manufacture garage door openers, rolling door openers, sliding gate openers and door components.100% of our products are for global markets. About 90% of our products are exported to Europe, Australia and South Africa.

All ET door openers have CE approval (LVD, EMC, RTTE).

Functions:

1).Multi opening ways

2).Electronic limit switchs

3).Automatic safety reverse

4).3 minutes light delay

5).Manual release in case of power failure

6).Chain drive,low noise

7).Soft start,soft stop

8).Remote control

9).Infrared sensor(optional)

10).Flash light(optional)

11).Backup battery function(optional)

12).Wall switch(optional)

Specifications:

INPUT VOLTAGE:			220/230V AC 50Hz
			(110v AC 60Hz or 127V AC 60Hz available on request)
			Single Phase
			Current Required		1Amp
TRANSFORMER SPEC:			Primary Voltage		220/230V AC
WORKING CIRCUMSTANCE:			TEMPERATURE:		-20~55
			RELATIVE HUMIDITY:		<90%
MOTOR SPEC:			Motor Type		Permanent Magnet D.C. Motor
			Voltage		24V DC
			Torque		150 kg.cm at 4 Amps
CONTROL BOARD SPEC:			Relay Contact Rating		30 Amp / 30V DC
			Relay Coil Voltage		24V DC
			Control Board Voltage		24V DC / 5V DC
			Light Glove Voltage		220v ac 15 watts Max
			Receiver specification		Receiver type		FSK AM
			(built-in) RF Frequency				433.92MHz
					Code Storage Capacity 20Different codes
					Control distance 50m max.
TRANSMITTER SPEC:			Carrier Frequency		433.92MHz
			Current Consumption		50mA(approx)
			Battery Voltage		12 Volts A23 battery
			Coding Format		Rolling Code(7.38*1019 Combinations)
WEIGHT:			14.00KGS
MODEL:			ET-600  ET-800  ET-1000

Test Equipments:

Other Styles Of Door Openers:

CE Certificates:

CE/ROHS chain drive section garage door opener,vertical garage door openers,automatic sliding,door closing mechanism