Industrial casters and wheels To avoid improper use or equipment. Users to have the appropriate casters and wheels equipment maintenance and operation responsibility. If want to overload, heavy to light it in the car.

The rough road of high-speed or heavy bump casters and wheels can lead to the wheels or equipment damage.

So, please check support and fasteners. The loose of shaft and nut tightening and inspection weld or support plate for damage. Overload or the impact would lead to support deformation. And the deformation of the support to heavy duty inclined pressure in individual wheel to wheel early failure. If it is inserted link type wheel, should tighten nut or strong rivet and ensure equipment support without bending and inserted bar installed correctly. Assembly caster should be used when the locking nut or locking gasket. Expansion inserted bar sex castor device to ensure the inserted link firmly installed on the casing.

Lubrication: regular lubricating, wheels and activities bearing can use for a long time. You put grease on axle, seal and within roller bearing friction parts, can reduce friction and make more flexible rotation. Normally every six months on a lubricating oil. The car a month after cleaning in lubrication to the wheels. The wheels: visual check the wheel wear. The wheel rotational impeded and fine red, the rope and relevant. Anti-wind cover can Yin stop these sundry winding.

casters and wheels and don't too loose or too close also, to replace the damaged casters in order to avoid the instability of the rotation. Inspection and replacement after the wheels, shall ensure that use lock gasket and nut tightening shaft. Because the shaft running can lead to wheel amplitude and support friction and jammed. Should have replaced wheels and bearing in order to avoid loss of production.

Activities to: if activities steering too loose, should be replaced immediately. Such as casters and wheels center rivet is nut fixed shall ensure that its lock firm. Such as activities to cannot free rotation, should check ball place to have corrosion or dirt. If the assembly have fixed type caster, shall ensure that castor support without bending phenomenon.

Accept OEM service

Industrial Casters And Wheels