Ads by Google
Auto Diesel Fuel Filter Water Separator 500FG Filter Separator (TNS-A015)
Description:Turbine Series Fuel Filter/Water Seprator
Flow Rate: 60GPH / 228LPHDimensions: Height 11.6", Width 4.5", Depth 4.8"Port Size: 3/4”-16Fitting Type: #8 O-Ring Boss / 3/4" O-Ring Boss Fittings Required: 2Replacement Element: GTB22, Any Racor Type 2010 equivalentService Clearance for Element Replacement: 3.5"
All TANOSEN Turbine Fuel Filter / Water Separators are tested at its facility in our factory prior to shipment.
Each unit undergoes a thorough examination and testing process that includespressure test, torque checks, and flow circuit testing to ensure your TONASEN filters works as you expect right out of the box.
Need a different micron size? TANOSEN filters come preloaded with a 30 micron element. If you need a different micron size, just let us know.
If you have any questions about Diesel Filters Direct or any of the TANOSEN Filtration Products that we sell, please EMAIL me or you can call us at: +86-57765909007. We look forward to hearing from you
- Compare to Racor 1000 Series - Flow Rate: 180GPH / 681LPH - Available also in S4 - 304 Stainless Hardware Equipped
- Compare to Racor 900 Series - Flow Rate: 90GPH / 341LPH - Available also in S4 - 304 Stainless Hardware Equipped
- No Racor Cross Exists - Flow Rate: 120GPH / 455LPH - Available also in S4 - 304 Stainless Hardware Equipped
Item | Part No. | Description |
1 | RK11888 | T-handle (FG/FGSS only), thread is 9/16”-18 SAE |
11350 | T-handle O-ring (FG) | |
11003 | T-handle Nylon Gasket (FE/FF-not shown) | |
2 | RK15078 | Lid (FG/FGSS/FGMSS) |
15005 | Lid Gasket (all models) | |
3 | RK15377-01 | Body, 3/4”-16 UNF fuel ports (FG, effective 1/15/96) |
RK15377-02 | Body, 16M x 1.5 fuel ports (metric, effective 1/15/96) | |
RK15377-03 | Body, 3/8”-18 NPTF fuel ports (effective 1/15/96) | |
RK15082 | Body, 9/16”-18 UNF fuel ports (FF/FG) | |
4 | 2010SM-OR | 2 Micron Element w/ Seals |
2010TM-OR | 10 Micron Element w/ Seals | |
2010PM-OR | 30 Micron Element w/ Seals | |
5 | RK15310-01 | Heater, 12 vdc, 150 watt (for use w/ body feed-thru) |
RK15383-01 (1) | Heater, 12 vdc, 150 watt w/ body feed thru (item 8) | |
RK15310-02 | Heater, 24 vdc, 150 watt (for use w/ body feed thru) | |
RK15383-02 (1) | Heater, 24 vdc, 150 watt w/ body feed-thru (item 8) | |
6 | RK15090 | Mounting Bracket w/ Attached Bowl Ring (FG) |
RK15035 | Bowl Ring (FE/FF/FGSS-not shown) | |
7 | 15374 | Bowl Gasket (supercedes 15009 O-ring-All models |
8 | RK21067 | Body Feed-thruAssembly (for bodies w/ feed-thru port) (wire guage=14 AWG) |
9 | RK15013D | Turbine Centrifuge / Conical Baffle (All models) |
10 | RK21069 (2) | Water Probe (for bowls with 1/2”-20 UNF port present) |
RK20126 | Water Probe Port Plug (plastic) | |
11 | RK30488 | Self-Venting Drain (FF/FG/FGSS,See Figure 2) |
11040 | Bowl Drain Fitting (FE/FF,See Figure 2) | |
RK11341 | Bowl Drain Gasket Kit (11041 & 11340-not shown) | |
12 | RK15279 | See-thru Bowl w/ Water Probe Port & Plug |
RK15301 | Metal Bowl with 1/4”NPT drain threads (FFM/FGMSS) | |
13 | RK15010B | Check Ball w/ Seal (All models) |
14 | RK15081-01 (3) | Phillips Head Capscrews 10-24 x 1” (4) |
RK15081 (3) | Hex/Washer Head Capscrews 10-24 x 7/8” (4) | |
15 | RK15079 | Standard Return Tube |
16 | RK15300 | Mounting Bracket, 3-piece Clamp Type (FGSS/FGM) |
17 | RK15211 | Assembly Seal Service Kit, All models (not shown) |
RK11746 | Seal Service Kit for Drain #11780 (See Figure 2) | |
15332 | Installation Instructions, 500 Series | |
(1) Filter body must have port next to fuel Inlet for heater feed-thru installation. In-filter heater kits may require a Heater Relay Kit. Power requirements are (maximum) : 12vdc=12.5amps, 24vdc=6.3amps.(2) Water probe must be used with a Water Detection Kit.(3) Models built prior to 2/96 use RK15081-01, after 2/96 use RK15081. (The fuel ports have a 1 1/4” square boss on models made after 2/96).(4) Replace with 30488 drain valve.SeeAccessoriesSection. | ||
Auto Diesel Fuel Filter Water Separator 500FG Filter Separator (TNS-A015)