raised floor pedestal is used flor raised floor system ,with or without stringer, can be used with or without gasket

Surface treatment:yellow galvanized or white galvanized.

anti-rust,high quality,adjustable pedestal,they are used for for panels.

The pedestal design utilizes a 70mm square head.The base plate is nominally 105mm square and includes provision for the use of machanicla fixing to the sub-floor in addition to the usd of pedestal adhesive if required.The pedestal head design allows for the use of bolt-on stringers if required.Pedestal height:Pedestal are available in different heights to accommodate floor finished from 75mm to 500mm high.Each pedestal +/-15-25mm height adjustable.

The pedestal design utilizes a 75x75mm head which allows the use of standard plastic head caps. The baseplate is nominally 100mm square and includes provision for the use of mechanical fixing to the sub-floor in addition to the use of pedestal adhesive if required. The pedestal head design allows for the use of bolt-on stringers if required. 

a. Pedestals finished floor height: FFH=15-60cm

b. Pedestal Base at 100*100*2mm thick steel plat. 4 screw holes, one at each corner.

c. Pedestals with flat steel head, carried by a leveling nut on threaded M18 solid steel column, with provisions to prevent vibration displacement of the leveling nut, inlaid in the 22x22mm square tube.

d. Pedestal head size: 75mm *75mm *3mm

e. All understructure are in silver galvanize to prevent corrosion damage.

Square Tube raised floor Pedestal