IntroductionModel HZ51-240-720 series decking forming machine consists of uncoiler and its base, coil sheet guiding equipment, roll forming system, post-cutting equipment, hydraulic station, controlling system, supporter table. The corrugated profile sheet produced by this machine has high strength with big rib, which adheres well to concrete. It best to be used as the floor of high buildings, and the cost of such floor is low.
Technical Parameters>
Material Spec | Galvanized steel sheet |
Thickness of Coil Sheet | 0.8 --1.2 mm |
Main Motor Power | 18.5kw |
Forming Speed | 10--12m/min |
Hydraulic Station Powe | 3kw |
Quantity of Stands | About 24 groups |
Hydraulic Pressure | 10~12Mpa |
Controlling System | PLC control system |
Index Error of Length | 10m/mm |
Total Weight | About 1800kg |
Voltage | 380V 3 phase 60Hz or to the buyers requirement |
Standard Equipment of Machine
Passive uncoiler | 1pcs |
Guiding equipment | 1set |
Rolling forming equipment | 1set |
Pressing equipment | 1set |
Post-cut equipment | 1set |
Hydraulic station | 1pcs |
PLC controlling desk | 1 pcs |
Supporter table | 2 pcs |
Security cover (optional) | 1set |
FeaturesHigh solid forming stand guarantees the stable forming and uniform high quality of final products.Able to secure higher productivity since the management of the line is automated by controlling an electronic system.Improved cutting method minimizes the tolerandce of cutting length