Ads by Google
SEIP-ON FLANGE1)Material: ASTM A105 Steel2)Standard:ANSI B16.53)Pressure: 150LBS/300LBS/600LBS4)Size:1/2~24"
5)Properties: Forged steel flange is made of high quality carbon steel with skillful workmanship possessing splendid strength and toughness properties, It is widely used in pipeline works of petrochemical industry, chemical industry, chemical fertilizer equipments, etc.
The Slip-on flange has a low hub because the pipe slips into the flange prior to welding. It is welded both inside and out to provide suffcient strength and prevent leakage.Slip-on flanges are all bored slightly larger than the O.D. of the pipe. They are preferred over welding neck flanges by many users due to their lower intial cost, but final intallation cost is probably not much less than that of the welding neck flange because of the additional welding involved.
Advantages:
Low cost installation
Less time needed to spent on ensuring the accuracy of the cut pipe
They are somewhat easier to align.
The slip-on flanges have low hub because the pipe slips into the flange before welding.
The flange is welded both inside and outside to provide sufficient strength.
They prevent leakage.
Main market
North America, South America, Eastern Europe, Southeast AsiaAfrica, Oceania, Mid East, Eastern Asia, Western Europe
ISO9001:2008 approved
Package: in plywood cases
Payment:30% deposit,70% balance after cargos shipped.
Delivery date:30 days since firm order placed.
Ordering
1)Material and standard
2)Size(1/2"~24")
3)Pressure(150lbs/300lbs/600lbs)
4)Category(Slip-On FLG)
5)Quantity
SEIP-ON FLANGE