desulfurization tower PP mist eliminator 1. PP material 2.Optimum structure 3. 2stages or 3stages 4.2-5 cleaning devices

Ddesulfurization tower PP mist eliminator Characteristic:

Simple structure, small size, light weight, porosity, pressure drop

Contact with large surface area, in addition to foam separation efficiency

Small resistance, light weight, installation, operation easy maintenance, 

protection of the environment, reduce air pollution, long life

PP mist eliminator Use:

Demister pads for chemical industry , demister pads for acid making

PP mist eliminator can be used  for wet Flue gas cleaning from SO2.

PP mist eliminator Style and Production range:

Style	Diameter	Thickness
Up-style	DN300-~ 5200mm	100mm and 150mm
Down-style	DN700~4600mm	100mm and 150mm

Mist Eliminator Pad 

is also known as mist eliminators or sprays. This is a kind of high efficiency separation devices, used throughout all kinds of process industries, to remove liquid droplets from gas and/or vapour streams.

Wire mesh demisters uses:Chemical, petroleum, sulfate, medicine, light industry, metallurgy, machine, building, construction, aviation, shipping and environment protection. Demister pad is mainly used to eliminate streams with diameter of more than 3μm to 5μm.Features: Simple structure, light, less pressure drop, big surface, high demisting efficiency, easy installation, operation and maintenance and long service life.

1st Generation: Standard Type(98standard preparing company) Feature: small volume, light weight, small resistanceHG5-1404-81 Exit tube type wire demisterHG5-1405-81 reducing wire demisterHG5-1406-81 full wire demisterDiameter:300-640mm, total 136 specifications

2nd Generation: Drawer type(Patent No. ZL93 2 46402.5), feature as following:a.no need to enter into tower to clean, repair, or replace.b.Easy clean, long life, stable performancec.Short repairing time, low cost, simple structured.Blind plate can be installed to meet low load operation, increasing adaptability and application range.   3rd Generation : V type(patent no. ZL97.2.36744.6)Besides features of 1st and 2nd generation, it also includinga.Gas and liquid has their each path, avoiding re-entrainment and increasing efficiency.b.The V structure increases mist removing surface by 15%c.One layer V type demister can work with same performance of 2 layers common demister, saving installation space and cost.316L, NS-80, or F46,PP materials can be used according to customer condition.