1.Fibers and binder distributed equally 2.It is non woven 3.Smoothy surface, good ligh transmission 4.Moderate hardness

1.Fibers and binder distributed equally 2.It is non woven 3.Smoothy surface, good ligh transmission 4.Moderate hardness

Technical specifications:

R2O Content: <0.8%

Filament diameter:11μm-13μm

Moisture:≤0.2%

Loss on Ignition:2%-9%

Binder Type Powder or Emulsion

Compatible Resin: Polyester

Styrene Solubility <50seconds

Product Characteristics:

1.Quick wet-out with resins,degassing properties,easily fills mold and conforms to complex shapes.

2.Fiber and binder evenly distributed without defects of fuzz,oil spot,and blots.

3.High mechanical strength and high wet strength retention.

Product code	Width(mm)	Compatible resin	Breaking Strength(N/150mm)
EMC80 EMC100 EMC120 EMC150	≤3200 ≤3200 ≤3200 ≤3200	EP/UP EP/UP EP/UP EP/UP	30 30 30 35

*Special:products are according to customer's requirements.Individual and bulk packaging:Individual packaging:each roll is wound on a cardboard tube(exterior diameter 76mm)and protected by a plastic bag,then be put into a carton.Each standard pallet with the size of 1020mm×1280mm×120mm contains 20 of rolls with the packaging type of 4x5.Static stacking of the pallets is possible up to one high.Storage:The EMC should be stored dry and in its original packaging.The best conditions are temperature between 10°C to 35°C and at a relative humidity between 35% to 55%.

E-glass Chopped Strand Mat CSM