Ads by Google
Optical Switch TPOS
Summary:
TPOS optic switch is mainly applied in optic circuit switch , optic equipment switch that demands high reliability operation. Such as CATV system head-end 1550nm Optic transmitter, EDFA automatic switch of heat-backup, with the aim of protection of optic route switch, self-healing circle network. Also it can be adopted in dynamic configure CADM , OXC ,system monitoring and failure protection
Characteristic:
TPOS has very low insert loss ,Typical≤0.6dBMaximum ≤1.0dB,with advanced level internationally, It has three types :1×2,2×1or2×2, 19standard casing ,Automatic status or manual switch status can be set at front panel. The optic power through by can be displayed at front panel
Parameters
TPOS |
Wavelength 1260~1360 or 1510~1610nm |
Insert loss ≤1.0(Typ≤0.6 )dB |
Echo loss ≥55dB |
Polarization relative loss ≤0.1dB |
Repeatability ≤±0.02dB |
Switch time ≤10ms |
Voltage AC135~250V |
Optic connector FC/APC & SC/APC |
Casing Size 19"×8"×1.75" |
Transmission power ≤500mW |