Ads by Google
Fiber fusion Splicer
l Both X and Y axis display
l Large multiple & visible fiber core
l Turnover display screen to use conveniently
l Inner light to set fiber at night
l Auto check end-face of fiber
l Auto calculate splicing loss
l Auto select suitable fusion program
l Small bulk and light weight
l Alternating /Direct Current available
l Concave weatherproof cover& Max. wind velocity of 15m/s
l Inner Li-battery to use conveniently
Specifications:
Applicable range
1) SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) CS and ED
SM cord 4-14µm, MM cord 50,62.5µm ; 125µm outer diameter (standard)
2) Fiber cleaved length: 16mm
3)Average splicing loss: 0.01dB MM/0.02dB SM (standard measure)
4)Typical splicing time: 9s, typical heating time:60s, return loss > 60dB
Fusion program
1)10 units factory setting program, 10 units user setting program
2)Heater Inner heater, optional outer heater, can heat 4 protecting sleeves at same time
3)Heater time is 30 seconds
Screen display
1)Both X and Y axis display, display current time and date, display current work mode
2)Appearance: 172mm(length) x180mm (width) x150mm (height)
3)Screen: 5 inches LCD Monitor Weight: 4.6Kg
Work mode
1)Program/Splicing/Heating: Automation or manual optionally
2)Storage of splicing result: The last 5000 results to be stored in the internal memory
3)RS 232 interface: Connect with computer for transmitting data, printing and storage
Environment
Temperature: -10-50 Storage:-40-60
Humidity: <95%RH (without dew) Storage humidity: without dew
Work altitude: 0~4000 meters
Max. wind velocity of 15m/s
Power supply
Alternating Current: 220V+15% 50Hz 30W Direct current:1013V 25W
Inner Li-ion battery and AC adaptor
fiber Fusion Splicer