Introduction
Desktop OLT with high cost performance (Gigabit Ethernet Passive Optical Network). Support as many as 8 PON ports (Pluggable). Transmit voice, data and video, etc. by single fiber cable.
Port:
PON Card:
Fan:
Power Supply:
Desktop OLT: High integrationFollowed EPON technology development, CNCR launches product based on the latest EPON standard CLE9000-1 is the rare high integrated EPON system equipment which has both L2 / L3 switch function. Making use of optical fiber network for all kinds of users, such as home users, enterprise users, etc, to provide a transmission platform of maximum bandwidth reaching to 1 Gbps. CLE9000-5 could provide uplink ports to IP core network and at the same time provide eight downlink ports. Each port on a single fiber supports 32/64 optical splitters. The single OLT can support 256/512 ONU. Transmission distance can reach to 20 km. Its height is only 1U. Meet various application scenarios, such as FTTH/FTTB/FTTC, etc.
Physical Parameter | ||
Dimension | 482.6 mm (width) x 275.0 mm (Length) x 43.6 mm (height) | |
Weight | 5kg | |
Power Supply | One AC power supply slots, input voltage 110/220V; or two DC power supply slots, input voltage:-48V (Optional: -36V~-72V DC) | |
Power Consumption | Maximum: 80W | |
Uplink Port | Four GE ports: Support SFP transceiver, can use electric module or optical module | |
OLT Port | At most eight PON ports, support SFP transceiver, can use various distance optical module; Connect with ONU through optical splitter | |
MGNT Port | RJ45, 10/100Base-T out of band network management port | |
CON Port | RJ45, Console port providing the diagnosis system | |
EXT Port | RJ45 port providing connection alarm. | |
Optical Port | ||
Standard | IEEE802.3ah | |
Fiber | Single mode fiber | |
Connector | SC | |
Optical loss | PX20, PX20+ Maximum distance which can be up to 30km | |
Wavelength | The sent one:1490 nm; the received one:1310 nm | |
ONU Authentication | MAC Authentication | |
Maximum splitting ratio | 1:64 | |
L2 Switch Function | ||
Nonblocking switch | Line speed transfer | |
L2 multicast | 512 L2 multicast lists Support IGMP-Snooping,IGMP-Proxy | |
VLAN | 4094 tagged (802.1Q) VLANs | |
QinQ | Support QinQ (Flexibility in use) | |
Link Converge | IEEE 802.3ad |
QoS | |
Type of service (CoS) | Support at most four CoS queues at each output port Support 802.1Q priority Supported queue system: Strict law, delay method, weighting method Support IPv4 TOS priority remapping Support IP Precedence, DSCP |
Speed control of output port | Token bucket function from 1 Mbps~1 Gbps Broadcast, multicast and DLF speed control based on port |
Bandwidth management: support DBA | |
Security | |
ACL | Strategy based on all kinds of protocol, source/target IP, source/target TCP/UDP port number and ToS combination Support permit, deny, DSCP remarking, rate limit or priority remarking. |
Environment Parameter | |
Work temperature | -5ºC to +45º C |
Relative humidity: | 5% to 90% no condensation |
Storage temperature | –40 to +75º C |
Storage humidity | 75% (Maximum) |
Management | |
Remote management | |
Remote upgrade | |
Support CLI |
Network Diagram:
EPON OLT 1U