1 optical fiber cable Single/multi mode providing strong water resistance performance 2eat anti-crush capable 3)tensile prop 2/4/6/12/24 Core Aerial GYFTY Loose Tube Non-metallic  single mode optical cable outdoor

  Network fiber optic cable Item: GYFTY fiber optic cable

I. Aerial Non-metallic FRP strength single mode fiber optic Description

The fibers GYFTY, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes of GYFTY are filled with a water-resistant filling compound.A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. Then the GYFTY cable core is covered with a thin polyethylene (PE) inner sheath, which is filled with jelly to protect it from water ingress.A layer of water-blocking material is applied around the cable core to prevent water ingress all the same. After a corrugated steel tape armor is applied. the cable is completed with a PE outer sheath

II. Aerial Non-metallic FRP strength single mode fiber optic Charateristics

Good mechanical and temperature performance Aramid yarn strength member ensures good performance of tensile strengthHigh strength loose tube that is hydrolysis resistantSpecial tube filling compound ensure a critical protectio of fiber Crush resistance and flexibility Single Fiber Reinforced Plastic as the cntral strength member Loose tube filling compound 100% cable core filling

III. Aerial Non-metallic FRP strength single mode fiber optic Feature

Can be installed without shutting off the powerExcellent AT performance, The maximum inductive at the operating point of AT sheath can reach 25kVLight weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops Large span lengths and the largest span is over 1000mGood performance of tensile strength and temperatureThe design life span is 30 years   GYHTY cable complies with Standard YD/T 901-2001as well as IEC 60794-1.Storage/Operating Temperature : -40°C to + 70°C GYHTY cable complies with Standard YD/T 901-2001as well as IEC 60794-1.

  6/12/24 Core Aerial Non-metallic FRP strength single mode fiber optic   

GYHTY cable compliance with Standard YD/T 901-2001as well as IEC 60794-1. 

Aerial Non-metallic FRP strength single mode fiber optic Characteristics

G.652 G.655 50/125μm 62.5/125μm Attenuation (+20°C) @850nm ≤3.0 dB/km ≤3.0 dB/km @1300nm ≤1.0 dB/km ≤1.0 dB/km @1310nm ≤0.36 dB/km ≤0.40 dB/km @1550nm ≤0.22 dB/km ≤0.23dB/km Bandwidth (Class A) @850nm ≥500 MHz·km ≥200 MHz·km @1300nm ≥1000 MHz·km ≥600 MHz·km Numerical Aperture 0.200±0.015NA 0.275±0.015NA Cable Cut-off Wavelength λcc ≤1260nm ≤1480nm

Technical Parameters

Cable Type Fiber Count Tubes Fillers Cable Diameter mm Cable Weight kg/km Tensile Strength Long/Short Term N Resistance Long/Short Term N/100mm Bending Radius Static/Dynamic mm GYFTY-2~6 2~6 1 5 11.0 100 600/1500 300/1000 10D/20D GYFTY-8~12 8~12 2 4 11.0 100 600/1500 300/1000 10D/20D GYFTY-14~18 14~18 3 3 11.0 100 600/1500 300/1000 10D/20D GYFTY -20~24 20~24 4 2 11.0 100 600/1500 300/1000 10D/20D GYFTY-26~30 26~30 5 1 11.0 100 600/1500 300/1000 10D/20D GYFTY-32~36 32~36 6 0 11.0 100 600/1500 300/1000 10D/20D

Storage/Operating Temperature : -40°C to + 70°