1310nm SM 10Km 10G XENPAK
Feature:
1.XAUI Electrical Interface: 4 Lanes @ 3.125Gbit/s
2.Hot Z-Pluggable
3.SC-Duplex Optical Receptacle
4.MDIO, DOM Support
5.Uncooled 1310nm DFB
6.Pin Photo-detector
7.Operating Case Temperature: 0 to 70 °C
8.Compliant to IEEE 802.3ae 10GBASE-LR Application
9.Compliant to XENPAK MSA
Reference
IEEE 802.3ae as 10GBASE-LR, XENPAK MSA Release3.0
General DiscriptionHOESN’s 10Gb/s XENPAK transceiver module HXK-1031-10 is a hot pluggable in the Z-direction module that is usable in typical router line card applications, Storage, IP network and LAN and compliant to XENPAK MSA. The HXK-1031-10 is a fully integrated 10.3Gbit/s optical transceiver module that consists of a 10.3Gbit/s optical transmitter and receiver, XAUI interface, Mux and Demux with clock and data recovery(CDR). This version of HOESN co., transceiver line uses an uncooled 1310nm DML Laser Diode to achieve 10km over standard single mode fiber as 10GBASE-LR of the IEEE 802.3ae.
Optical Characteristics
Table 1. Optical Characteristics
No. | Parameters | Symbols | Min. | Typ. | Max. | Unit | Remarks |
1 | Center Wavelength | λC | 1290 | 1310 | 1330 | nm |
|
2 | Signaling speed |
| - | 10.3125 | - | Gbit/s |
|
3 | Signaling speed variation from nominal |
| -100 | - | +100 | ppm |
|
4 | Average Optical Power | Pf | -5.0 | - | 0.5 | dBm |
|
5 | Side Mode Suppression Ratio | Sr | 30 | - | - | dB | Average |
6 | Extinction Ratio | Er | 3.5 | - | - | dB |
|
7 | Off Transmit Power | Poff | - | - | -30 | dBm | Average |
8 | Receiver Sensitivity | Rsense | - |
| -14.4 | dBm |
|
9 | Receiver Overload | Rro | +0.5 | - | - | dBm | Average |
10 | Optical Centre Wavelength | λC | 1260 |
| 1600 | nm |
|
11 | Los D-Assert | ROSd |
|
| -18 | dBm |
|
12 | Los Assert | ROSa | -32 |
|
|
|
|
13 | Los Hysteresis |
| 0.5 | - | - | dB |
10G XENPAK Module : MM 300M/ SM 10km/40km/80km available
1310nm 10km SM 10G XENPAK module