1.25 Gbps Smart SFP 1310nm FTLF2318P1BCL Transceiver
Refurished one
Finisar Smart SFPs are compatible with SFP Multi-Sourcing Agreement (MSA). In addition to local digital diagnostics functions via the 2-wire series bus specified in the SFP MSA, Smart SFPs also support remote digital diagnostics functions, i.e., when a pair of Finisar's Smart SFPs are on the same optical link, each end is capable of reading digital diagnostics information from the other end. This function is accessed via a nonintrusive optical communication channel. Additionally, Finisar's Smart SFPs offer optical Dying Gasp function. In order to utilize the remote DDMI and other advanced features equipment vendors only need to a make minor modification to their system software highlighted in the "Finisar Smart SFP host software interface specifications", available upon request from Finisar Corporation.
Key Features:
Up to 1.25Gbps Bi-directional Data linksHot-pluggable SFP footprintBuilt-in Digital Diagnostics Functions Supporting Local DDMISupport Remote DDMI via Built-in Out-of-band, Non-intrusive Optical Communication ChannelOptical "Dying Gasp"1.25Gb/s 1000Base-LX Ethernet1.06Gbps Fiber Channel1310nm FP laser transmitterPIN photodiode receiverApplications:
Remote DDMI and Optical Link ManagementOptical-layer DemarcationSpecifications:
Form Factor
SFP
Distance
10 km
Protocol
Optical Gigabit Ethernet Compliant
Data Rate (max)
1.25 Gb/s
Low End Case Temperature (°C)
-20°C
High End Case Temperature (°C)
70°C
Diagnostics
N/A
Transmitter
N/A
Receiver
N/A
Voltage Supply
3.3
Connector
N/A
1.25 Gbps Smart SFP 1310nm FTLF2318P1BCL Transceiver