1. polyimide metal foil and metal wire 2.excellent insulation 3.strong dielectric strength 4.lowest price

Technical data:

1. Insulation:  UDC500V>=200M ohm

2. Dielectrical strength: UAC>=2000V

3. Opeartion temperature:  <=232C

4. Wattage density:  <=1.1W/cm2 or <=6.5W/cm2(with thermostat)

5. Thickness:  <=0.2mm

6. Weight:  <=278g/m2

Design instruction:

 

1. Drawing for maximum installation size of the heater

 

2. Relevant electric parameters: as wattage, voltage, resistance, current and tolerance

 

3. Direction,  length and location of the lead wire

 

 

 

 

 

Basic information:

 

1. Interior FEP binding stands 200°C.2. Apply in vacuum environment.3. Stand against most of chemical material such as acid, impregnant, alkali (except NaOH).4. The size can be very small.5. Thin and small curly semidiameter.

 

6. Temperature Range: -50°C~200°C, the max temperature is 130°C for the heater with paster.7. Material: Kapton/FEP, polyimide membrane8. Resistance Precision: ±10%ak±0.5Ω(taking max)9. Medium Strength: 1000VRMS10. Minimum Curve Semidiameter: (0.8mm)