MY220 excavator
Specifications:
DIMENSION
A overall length(mm) 9739
B overall width(mm) 2980
C overall height(to top of boom)(mm) 3135
D overall height(to top of cab)(mm) 2939
E ground clearance counterweight(mm) 1065
F min ground clearance(mm) 442
G tail swing radius(mm) 2838
H length of track on ground(mm) 3445
J track gauge(mm) 4256
K track length(mm) 2380
L width of crawler(mm) 2980
M width of track shoe(mm) 600
N width of swing table(mm) 2700
Y grouser height(mm) 26
Z height of counterweight(mm) 2045
A1 length on ground(transport)(mm) 5162
X distance between swing center/end 2809
WORKING RANGE:
O max dinging height(mm) 9255
P max dumping height(mm) 6383
Q max digging depth(mm) 6930
R max vertical wail digging depth(mm) 5915
S max depth on 2.5m-width plane(mm) 6735
T max digging reach(mm) 10173
U max digging reach on ground(mm) 9983
V min swing radius(mm) 3974
W max height at min swing radius(mm) 7 717
Max bucket digging force(kg) 15970
Max arm digging force(kg) 12300
ENGINE:
Model-------------------------Isuzu 6BGITQB-05
Type---------------------------4 cycle,water-cooled,direct injection
Aspiration---------------------turbocharged
No. of cylinders--------------6
Bore----------------------------105mm
Stroke--------------------------125mm
Piston displacement ---------6.494L
Flywheel power--------------117kw/2150rpm
Governor----------------------mechanical, RSV
HYDRAULIC SYSTEM
Type---------------closed-center system with load
Sensing valves and pressure compensated valves
Main Pump
Type---------------variable-displacement piston pumps
Max flow---------2x226L/min
Hydraulic Motor
Travel-------------2-speed Axial piston motor
Swing------------Axial piston motor
Relief Valve Setting
Implement circuits---------------34.3Mpa
Travel circuits--------------------34.3Mpa
Swing circuits--------------------25.5Mpa
Pilot circuits----------------------3.9Mpa
Hydraulic Cylinder
Boom --------------2 130mm x 1285mm x 90mm
Arm---------------- 140 x 1635mm x 100mm
Bucket------------- 130 x 1020mm x 90mm
SWING SYSTEM
Driven by--------------------hydraulic motor
Swing reduction-------------planetary gear, double-reduction
Swing cycle lubrication----grease-bathed
Swing lock-------------------wet,multi-disc brake
Swing speed------------------11.8 rpm
DRIVE AND BRAKES
Steering control-------------two levers
Drive method----------------full hydraulic type
Travel motor-----------------axial piston motor
Max drawbar pull-----------174kn
Max travel speed------------3.5/5.2 km/h
Parking brake----------------wet, multi-disc
UNDERCARRIAGE
Center frame-----------------X-frame
Track frame------------------box section type
Track adjuster---------------hydraulic type
No. of shoes-----------------47each side
No. of carrier rollers--------2 each side
No. of track rollers----------8 each side
COOLANT & LUBRICANT CAPACITY(RepIacing)
Fuel tank----------------------340L
Radiator(water)--------------27L
Engine-------------------------17L
Swing drive-------------------3.4L Lubricant+2L grease
Hydraulic tank----------------246L
OPERATION WEIGHT(Approximate)
Operating weight--------------22180kg
(including boom,arm,bucket,operator,lubrication,coolant,full fuel tank and standard equipments)
Note: materials & specification are subject to change without notice
MY220 excavator