Application
Design for wind gerator (cabin, vessel, hub) inside lighting, and additional lighting for hazardas enviorment(waterproof, corrosion resistant, shockproof etc).
Main functions and features
• Soft light beam
PC grain housing makes the light beam softly, to protect eyes
• External long life, energy saving and environmental friendly
The life of LED can reach more than 50,000hrs, and the light can save 50% energy than common bulb, maintenance free.
• Integrated design, convenient for mount
Lamp body and junction box are combined together on a base, convenient for mount and maintenance.
• Selectable plug, terminals and cable gland
Equipped with standard 10A power plug, other type of plug can be selected as request.
No. of terminals and cable gland can be customized based on request.
• Emergency function
In case of power failure, emergency duration is more than 90mins, illumination is 80% of the normal
Specifications
Operating voltage | AC100V-300V | Frequency | 50Hz ~ 60Hz |
Power consumption | 19W | LED life | ≥50,000 hrs |
Color temperature | 5500K-6000K | color rendering index | Ra>72 |
LED luminance | 100lm/W | Lighting angle | >200o |
Working temperature | Emergency temperature:-30°C ~ +40°C | Relative humidity | 10% - 95% (no coagulation) |
IP Protection | IP44 | ||
storage temperature | -40°C ~ +70°C | Material | Housing: PC Base: aluminium alloy |
weight | 3.0 KG |
Operation and installation
• Check whether the power supply complies with rated voltage of the light.
• Secure the light on a smooth surface which has enough strength using 2*M10 screws.
• Equipped with 2*M25 cable gland(Can be customized per request), and connect the power cable and output cable through the cable gland.
• Power cable wiring diagram see left side
• After connecting and debugging the power cable, please plug the accessoried short sub cap into the SW SW tank. Emergency power start working at this time, and will automatically switch to the normal state when powered on.(Do not insert the sub hat into the SW SW groove if no power connected for a long time to advoid the battery discharge deeply).
• Indicator light status: 1. Power on Red, green light interactively flash 3 seconds
2.No battery Red, green light extinguish
3.Battery abnormal Red, green light consecutively and interactively flash
4.Charge Red light burns
5. Charge full Green light burns
Notice
•Temperature rise when light working is normal phenomenon.
•Please do not open any components inside by yourself.
•Ni-MH battery inside the lamp is a consumable, its cycle life (IEC61951-2/2011/7.5.1.2) it is recommended to conduct a charge-discharge maintanence every 3 months.
•This product is a sealed structure, please do not be tampered with anyone other than registered installer.
LY450A LED emergecy light