With two power sources, equipped with rechargeable battery inside of the lamp and supporting mandatory lighting mode,

In usually the light works as sensor light, automatically charging up for battery, when environment illumination below 5Lx, the sensor light is auto ready for working, then 66 LED lighting for moving people, and auto turning off after delaying time. The sensor light using convenient, safe & stability, and not be interfered by noise and so on. When power cutting, the light will become an emergency light (28LED lighting in all along). The battery working time more than 3 hours one time.

There are three indicator lights and one test press-button on the surface:

Green indicator light: lighting, it is meaning that the electricity AC220V is working (GDLYZ102C works as a sensor light).

Red indicator light: lighting, it is meaning that charging up  for battery.

Yellow indicator light: Debug indicator light, lighting, it is meaning that the light source or battery have problem, should be repaired.

Test press-button: pressing the button, the light will working as a emergency light.

Wiring:

Red line: Live wire

Blue line: Neutral wire

 

Model: GDLYZ102C

Specifications: Φ255×45(mm)

Technical Parameters:

Power Voltage: AC/220v~240v; AC / 100v~130v;

Frequency: 50~60Hz;

Type of Light Source: LED, PIR Light 66LED / Emergency Light 28LED;

Power Source: ≤5w;

LED Life: 75000h;

Emergency discharging time: ≥90min;

Sensing Distance: 5m~8m;

Sensing Angle: 360° / ≤140°(Cone Angle);

Delaying Time: 30s ± 5s;

Optimal Working Temperature: -25°C~55°C;

Installation: Ceiling,Wall. 

LED Emergency Sensor Light