1The sequin device can run 3mm,5mm,7mm,8mm,9mm sequins. 2The engine motor can be 0.5A or 1A 3The device is installed in front

 Model : DB-JP-01     C(pressure spring locking  type)

       

 (1) : Use funtion

           1.It adopts the combination of connection rod and pneumatic element to control up and down of device.

           2.The special steel guide groove can change the specification between different blades easily,which just changes the passing groove

           3.The use of flat sequins and concave sequins will achieve the best effect.

          4.The device is installed in the front(the initial needle position or the end needle position).

(2): Technical parameters

         1.Space of sequin device: 50mm

         2.Lifting traveking: 70mm

         3.Sequin embroidery speed:

               ¢ 3mm --- 4mm --- ¢ 5mm         1000 r / min

               ¢ 6.75mm----- ¢ 9mm                 800 r / min

         4.Specification of sequin: ¢ 3mm, 4mm, ¢ 5mm, ¢ 6.75mm, ¢ 9mm

         5. Specifications of stepping motor: 0.5A or 1A 

         6.The use of air pressure: 3kpa

connection rod type sequin device