Schneider Modicon USB/RS485 TSXPCX3030 PLC Cable

Schneider Modicon USB/RS485 TSXPCX3030 PLC Cable

Descriptions:

TSXPCX3030 programming cable simulate USB port as traditional serial port (usually COM3), which enables existing programming software to communicate through simulated traditional port and PLC devices.

TSXPCX3030 is used for communication between Modicon TSX series PLC and PC with USB port.

TSXPCX3030 supports TSX Premium(57),TSX Micro(37),TSX Nano(07),TSX Naza(08) and Twido.

TSXPCX3030 programming cable contains a Master/Slave switch which is used to select different working mode instead of PLC controlling RS485.Data sending and receiving is switched automatically,so the cable can be used for multi-station and point-to-point communication.

The TER port of TSX series PLC has a DPT signal which is used to distinguish the working mode of the port.If the DPT signal is high level,then the TER port is under Uni-Telway Master mode which is a requirement for PLC programming.If DPT signal is low level,then the TER port working mode is determined by the PLC.

Features and technological index:

support Windows2000/Windows XP operating systemfully compatible with USB V1.1 norms and USB CDC V1.1USB bus-powered, with current consumption of 50 mAbaud rate: 300 bps ~ 1Mbps automatically adaptive.apply to the TSX Premium, Micro, Naza, Nano and Twidoeach PC only supports a TSXPCX3030 cableLength: 2.5 meters, colors: black

TSXPCX3030 Schneider Modicon USB / RS485 PLC Cable