This plug-in ON/OFF Module in a transceiver which is a Z-Wave enabled device and is fully compatible with any Z-Wave enabled net    Function This is a switch plug-in and is used between a standard wall outlet and electrical loads connected to a wall outlet by cable. The unit is rated IP 20 and can therefore be used in dry environments only. The device switches all kinds of loads. The unit is included into a Z-Wavenetwork by a remote control, PC software or any other kind of Z-Wave controller.This plug-in ON/OFF Module in a transceiver which is a Z-Wave enabled device and is fully compatible with any Z-Wave enabled network. Z-Wave enabled devices displaying the Z-Wave logo can also be used with it regardless of the manufacturers, and ours can also be used in other manufacturer's Z-Wave enabled network. Remote on/off control of the connected load is possible with other manufacturer's wireless controller. Each module is designed to act as a repeater. Repeaters will re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots. Specifications Model :NZ-PU01perating Voltage:120Vac/60HzMaximum Load:1920WRange – Up to 100 feetFrequency :908.42MHzRelay: 15A

z-wave switch Z-Wave Plug in Switch - ON /OFF NWD smart home