Kapton tape : High temperature silicone adhesive Withstands 280degree/30minutes No Any residue after using

 kapton tape is  made of high temperature polyimide film. Which is  used in masking of circuit boards during wave soldering or other electronic manufacturing processes. It can be used in powder coating, automotive and transformer manufacturing. It has high dielectric strength. Polyimide masking tape, offers excellent performance in electrical and thermal insulation.

 Polyimide kapton tape

KD857 is a polyimide film-backed silicone adhesive tape with high temperature resistant.3 mil polyimide tape has a 1.5 mil silicone adhesive. It withstands temperatures up to 280 degrees and peels cleanly leaving no residue.

Test Data:

Backing	adhesive		color	standard length
Polyimide	Silicone		Amber	33m
Test Item		Units	Test values		Test method
Backing Thickness:		mm	0.075
Total Tape Thickness:		mm	0.105±0.005
Adhesion to Steel:		N/25mm	3.5		GB-T2972-98
Tensile Strength at Break:		N/cm	80		GB-T7753-87
Elongation at Break:		%	60		GB-T7753-87
Temperature resistance		° C	280
Dielectric Strength		volts	10000		GB/T7752-87

Feature:

High temperature silicone adhesive

Withstands 280° C/30minutes

No Any residue after using

Application:

Mask for protection of gold fingers of PCB during wave solder or solder dip process.

Release surface in fabrication of parts cured at elevated temperatures.

Widely used for electronical insulation on transformer, coils ,motor, PCB masking and  so on.

Storage Details: Store under normal   conditions of 10° to 30°C and 40 to70% R.H. in their initial packaging.

kapton tape