Hot water heater is used for conventional boilers for hands washing basins and showers with hot water reservoir installed in private households.
Hot water heater is always combined with different coatings. That is because water contamination and water hardness can erode the water heating elements in different regions. A special flange connector for magnesium electrode on hot water heater is available in the regions with extremely high contamination.
To avoid the over-heating when there is no water, a special tube for the thermal sensor or the thermal fuse as temperature cut-off is available on the hot water heater.
Hot water heater features
Designed for hot water system facing contaminated water and corrosion problems Flange connector for magnesium electrodeSufficiently resistant to overheating
Hot water heater technical Data
Description | Data |
Isolation at room temperature | ≥ 500 MΩ |
High voltage test at room temperature | ≥ 1800 V for 1 min (220 V) ≥ 2000 V for 1 min (380 V) |
Leak current at working temperature | ≤ 0.5 mA |
High voltage test at working temperature | ≥ 1800 V for 1 min (220 V) ≥ 2000 V for 1 min (380 V) |
Heating power | 1.5 to 12 kW |
Hot water heater,water heating elements