1.Dust removing by mechanical 2.Rapping,high efficiency filtering 3.15-year manufacturing experience and design 4.ISO,OHSMS

Features:

Filter cartridge submicron filtering, easy to changeAutomatic off-line dust removingEasy in operation and maintenanceMultiple tube connection locations for air inlets and outletsUse once installed designConvenient to transportation and transposition

Unit Structure:

      This unit is mainly constituted of equipment body,filter section,blower section,vibrating dedusting section,electric control device,dust colleting section.Details please refer to the operating manual.

Operating Principle:

        Normal operation: Put the unit in a separate dust removal room,allocate corresponding air hose and dust shield connect with dust collector. Plug in the power,switch on the fan key, dust yair enters into case bosy from dust source through dust hood, air hose and air inlet. Because of the aircurrent expands and the flow rate reduces suddenly,big grain dust separates from dusty air under the effect of its own gravity and settles down to the dust drawer, other small grain dust stays outside filter cartridge due to the effect of filtering,colliding,hooking,static electricity. The purified air is discharged from the fan to air outlet through the aboved anechoic chamber.The purified air from the unit can be discharged into the room for recycling without ventilation heat(refrigeration capacity)loss. After stoping,press the dedusting system running button,30 seconds later,dust removing done,finished dust-cleaning recovery task.

    Dust cleaning operation: Generally dust collector works discontinuously,the high-frequency vibration of motor can enable the filter cartridge to regenerate after the blower shuts down.

Applicable Scope:

       1.Applicable environment: Temperature: -10°C~+55°C, relative air humidity no higher than 85%, without compressed air source;

        2.Applicable industries: Chemical,Pharmaceutical,Food processing,Metal processing,Mechanical processing,Asbestos product processing,Metallurgy,Foundry,Electronic,Powder spraying,Electrostatic spraying,Carbon materials,Composite materials,Building materials,Refractory materials,Sandblasting,Cement,Mining excavation etc. and other fine air dust.

       Especially suitable for Pharmaceutical production line (dust removing and purification of mixer,tablet machine,granulator,dosing,mixing materials,screening,pulverizer,weighing,coating capsule,pretreatment process of Traditional Chinese Medicine)

 TUOER-A type Filter Cartridge Dust Collector: 

Projects   &Parameters	TUOER-5A	TUOER-10A	TUOER-15A	TUOER-25A	TUOER-30A	TUOER-40A	TUOER-60A	TUOER-80A
Nominal Airflow  (cfm)	294~412	530~647	823~940	940~1470	1530~2000	2175~2646	2880~3820	4116~5000
Rate Of Flow  (fpm)	3.9~5.48	5.48~6.69	7.64~8.76	4.36~6.82	5.94~7.74	6.76~8.2	5.35~7.12	5.35~7.12
External Static Pressure  (inH2O)	3.9~3.71	5.07~4.6	5.73~5.27	6.24~5.93	6.55~6.2	6.75~6.44	6.94~6.63	7.1~6.86
Inlet(in)	5.85	5.85	7.02	8.58	9.75	10.92	12.48	13.65
Motor(h.p.)	1	1.5	2	4	5	7	10	15
Filter Area(ft²)	75.35	96.88	107.64	215.3	258.34	322.92	538.2	688.9
Dust Drawer Volume   (cu.ft)	1.7	1.9	2.2	2.7	2.97	3.3	3.8	4.2
H (in)	6715/32	6755/64	6915/64	7825/64	7923/64	8231/64	8231/64	8859/64
D (in)	2941/64	3013/16	3223/64	3423/32	3617/64	377/16	4011/64	457/16
W (in)	2633/64	2711/16	291/4	3163/64	3335/64	357/64	3753/64	4311/16
Approx. Shipping Weight  (ibs.)	450	500	560	633	811	866	979	1071
Sound Level  dB(A)	65	67	70	73	73	75	78	80

( function(){ var aBigImageSrc = [ 'http://i01.i.aliimg.com/photo/v1/396700373_1/TUOER_A_type_Industrial_Filter_Cartridge_Dust.jpg' , 'http://i01.i.aliimg.com/photo/v1/396700373_2/TUOER_A_type_Industrial_Filter_Cartridge_Dust.jpg' , 'http://i01.i.aliimg.com/photo/v1/396700373_3/TUOER_A_type_Industrial_Filter_Cartridge_Dust.jpg' , 'http://i01.i.aliimg.com/photo/v1/396700373_4/TUOER_A_type_Industrial_Filter_Cartridge_Dust.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); TUOER-A type Industrial Filter Cartridge Dust Collector

Verified Information This information is Verified by TÜV Rheinland and is valid for the following period: 2013/03/20 --- 2014/03/20 All the information below may covers both Gold Supplier and its related companies , Their Relationship will be affirmed according to china laws and regulations , also it will be clearly display in the full report >> Production Capacity: Product line name Production Line Capacity Actual Units Produced(Previous Year)

Dust Collector	100 Sets / Month	Dust Collector 500 Sets

Export Market Distribution: Market Revenue(Previous Year) Total Revenue (%)

Southeast Asia	confidential	6.0
Oceania	confidential	2.0
Mid East	confidential	3.0
Eastern Asia	confidential	9.0
Domestic Market	confidential	80.0

Production Machinery: Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition

CNC Laser Cutting Machine	Shanghai Tuanjie & OLPC-1560	1	7.0	Acceptable
CNC Sheet Metal Bending Machine	Yawei & WD67Y-100	1	7.0	Acceptable
Plate Shearing Machine	Xinli & QC12Y	3	7.0	Acceptable
Plate Bending Rolls	Longsheng & W11S-40	2	7.0	Acceptable
NIP Machine	YTA-16	1	7.0	Acceptable
Dynamic Balancing Machine	Schenck & CJ0500	1	7.0	Acceptable
Argon Arc Welding Machine	Yadong & YHH-10C	1	7.0	Acceptable
(Filter Cartridge) Paper Folding Machine	ZE-9B/4	1	7.0	Acceptable
Lathe	DMTG & CD6140A	1	7.0	Acceptable

Testing Machinery: Machine Name Brand & Model No. Quantity Number of Year(s) Used Condition

Portable Anemometer	Beijing & QDF-J10	1	5.0	Acceptable
Hot Bulb Anemometer	Beijing & QDF-1	1	5.0	Acceptable

Production Flow: 1.Laser Cutting 2.CNC Bending 3.Shearing 4.Rolling 5.Lathe Machining 6.Argon Arc Welding 7.CO2 Welding 8.Dynamic Balancing 9.Paper Folding 10.Assembly