With less light attenuation and a long life span of 50,000 hours,The light can replace T5 flourescent lamp,which is much brighter than fluorescent lamp and better than most similar lighting products.
Features : 1. Energy saved up to 50%.high brightness,even lighting output.
2.5-years life time
3.Wide range of input voltage:AC100-240V
4.Instant start,no flickering,no humming
5.New high efficiency constant current driver
6.Special circuit design,each group of LEDs work separately,avoiding any
problem of lighting output caused or influenced by single faulty LED
7.No electrical wave,conforming to CE
8.Green environmental protection,lead-free material,conforming to ROHS
9.No RF interference
Applications: 1. Hotels
2. Conference/Meeting rooms
3. Factories&Offices
4. Commercial Purposes
5. Residential/Institution Buildings
6. Schools,Colleges&Universities
7. Hospitals
8. Pleaces where energy saving and high color rendering index lightings required
MAIN SPECIFICATIONS(T=20°C)
NUMBR | ITEM | DESCRIPTION |
01 | Input Voltage | AC96-265V |
02 | LED Power | 32W |
03 | Total Power | 36W |
04 | Luminous Flux | >2484Lm |
05 | LED Qty | 320 PCS |
06 | Color | Warm White Nature White Pure White Cool White |
07 | Color Temperature | 2800-3500K(Warm White 4000-4500K(Nature White 5000-5500K (Pure White 6000-6500K (Cool White |
08 | Life time | >50,000 Hours |
09 | OperatingTemperature | -10°Cto+40°C |
10 | Storage Temperature | -20°Cto+85°C |
11 | Humidity Operating | 10-80% |
12 | Humidity Storage | 10-80% |
13 | Luminosity | >8500 LUX |
14 | 2.0M Luminosity | >215 LUX |
15 | Certifications | CE,FCC,ROHS |
16 | Weight | 4.6 KG |
17 | Size | 300*1200*11.5mm |
18 | IK Code | IK01 |
19 | IP Code | IP41 |
20 | Luminaires Class | Class II |
21 | Fixing Ways | n-built ,Mounting,Suspending |
Dimensions :
Notes:
1,All dimension units are millimeters.
2,All dimension tolerance is ±0.5mm unless otherwise noted.
Packing :
Outer Carton:1287*350*175mm
Inner Box:1277*340*40mm
Weight/BOX:5.2KG
Quantity:4pcs/CTN Weight/ CARTON:22.8KG
Safety Notice for Using:.Please always use the light out of its package.
.Before starting use of the light ,please check if the light was damaged during transportation.if any damage shown,please DO not install or use it.
.Any maintenance should be performed by trained professionals only.
.Keep packaging material away from the rech of children and pets.Risk of suffocation!
.Caution.The packaging contains small parts that may be swallowed by children.
.Never leave childree unattended in the vicinity of the lights and do not allow them to play with electrical devices.
.Try to avoid looking directly in the LED beam-especially for extended periods of time.Do not shine the LED light in another person’s eyes.
.Never cover the lights by other objects.
.Never allow the light to come into contact with open flames or external heat sources.
.The products need to re-repair inspection or special treatment of retirement after service time.
Maintenance:.Prior to cleaning the light,make sure it has been disconnected form the power supply.
.Use a dry or slightly moistened cloth for cleaning.
.Never use any chemicals or abrasives for cleaning.
Disposal:.Used electronic devices must be collected for recycling and cannot be deposited together with daily garbage.
Installation:.This product should be installed by trained electricians.
.Check integrality of the products when unpack the packing.
The distance between the light and any flammable materials must not be less than 0.2m.The distance between the upper part of the installed light and the ceiling must not be less than 2cm.The light must not be installed into ceilings or walls that contain heat-insulating material.
. The main cable must not connect with the low volage cable or the surface-mounted lights..Guide the lights’ connecting cables through the drilled-out hole,and fix the surface-mounted lights with the pre-fitted clips.Make sure that these are securelyconnected to the base material.
.When laying the cables,make sure that the cables and plugs are not subjected to
any tensile or twisting forces.Fit the cable tension relieving mechanisms to the
connection points of the surface-mounted lights .Do not kink cables.Output
cables should be laid separately and at adistance from other cables.
.After installation,connect the transformet to the mains supply.
Proceed by connecting the wiring cables to the luminaries.Usually,the brown
(or black)wire is the Live wire,connect it with the terminal marked’L’.The blue
wire is Naughty wire,connect it with the terminal marked’N’.
Disposal:.Use only the LED drover included,and do not connect the surface-mounted lights
to other loads.
Do not remove the name plate of the power suply and driver of the light.
Notes:Non-professinonals are not allowed to disassemble and maintain the products.We
have the right not to provide after-slae service if unauthorized disassembly and
maintenance happens to the products.