Ads by Google
Rotary Kiln Introduction and application:
Rotary kiln is the main equipment of calcining the cement clinker. The characteristics of a rotary kiln are with simple structure, convenient and reliable control of the producing process,with little wearing parts and high running rate. It is the equipment calcining the high grad cement in the cement factory. The rotary kiln is widely used in the metallurgy,chemical industry,construction and other industr. Rotary kiln work principle:Rotary cylinder dryer mainly consists of axially symmetrical, Yang stripper plate, gearing, supporting device and seals and other parts. Dryer is one with horizontal direction slightly sloping cylinder, material into from high end to join, high temperature hot flue gas and material flow into the cylinder, along with the cylinder body rotation, material operation to lower end. On the wall of the cylinder copy board the material start to copy and asperse, make the material of surface in contact with air drying rate increases, in order to improve and promote materials on. After drying product from the bottom bottom collection.
Cement Rotary kiln key Features:
1. Low pressure drop pre heaters
2. Raw mill equipped with High efficiency separator
3. Raw Meal blending in CFC silo
4. Inlet & discharge fitted with efficient seals
5. Benchmark cooler design.
6. Low Fuel Consumptio
7. Low Pressure Drop pre heater
Technical Specification of Indirect rotary kiln:
type | technical specification | main reducer | main motor | catch wheel | catch points | weight (t) | |||||||||||
rotation speed (r/min) | inclination (%) | output (t/h) | type | speed ratio | type | power (kw) | rotation speed (r/min) | ||||||||||
Φ1.9/1.6×36 | 0.53-1.59 | 4 | 2.5-3 | JZQ750-1 | 48.58 | JZT-72-4 | 30 | 1200/400 | machine | 3 | 53 | ||||||
Φ2.1/1.8×36 | 0.5-1.51 | 4 | 4 | UT2-110 | 163.36 | JZS-81 | 30/10 | 1410/470 | .. | 3 | 75 | ||||||
Φ1.2×25 | 0.5-1.6 | 3 | 1.5 | PM650 | 40.17 | JZTY71-4 | 22 | 1200/120 | .. | 3 | 34 | ||||||
Φ1.6×32 | 0.158-0.258 | 3 | 2 | PM750 | 48.57 | JZJY61-4 | 15 | 1200/120 | .. | 3 | 46.82 | ||||||
Φ1.8×45 | 0.66-1.98 | 4 | 3.5 | UT2-110 | 163.36 | JZS-81 | 30/10 | 1410/470 | .. | 3 | 80 | ||||||
Φ2.2×50 | 0.125-1.25 | 3.5 | 4 | ZS145-11 | 157 | YCT280-4A | 30 | 1320/132 | .. | 3 | 130.71 | ||||||
Φ2.5×50 | 0.516-1.549 | 3.5 | 5.5 | ZS165-7 | 99.96 | YCT355-4A | 55 | 1320/440 | .. | 3 | 167.5 | ||||||
Φ3×48 | 0.3309-3.309 | 3.5 | 35 | ZL130-14 | 32.11 | ZSN4-250-21B | 90 | 1000/100 | .. | 3 | 237 | ||||||
Φ3.2×50 | 0.398-3.975 | 3.5 | 13-32 | ZL130-16 | 40.85 | Zsn4-280-11B | 190 | 1500/150 | ; | 3 | 263 | ||||||
Φ3.3×52 | 0.391-3.91 | 3.5 | 14-38 | ZSY500-28 | 27.707 | ZSN4-315-082 | 190 | 1000/100. | : | 3 | 280.8 | ||||||
Φ4×60 | 0.396-3.96 | 3.5 | 32-80 | ZSY630-35.5 | 34.601 | ZSN4-355-092 | 315 | 1000/100 | : | 3 | 487.5 | ||||||
with high quality and low price rotary kiln