Silica sand drying machine: 1.High drying efficiency 2.High dealing capacity 3.Direct&professional manufacturer

Silica sand drying machine working principle

Sand is sent to the hopper by the belt conveyer and bucket elevator, and then through the hopper feeder into the feeding pipe, thereby entering the feeding end. The feeding pipe inclination is greater than the natural angle of materials, so that material flows into the sand dryer.Dryer cylinder is a rotating cylinder that have a certain inclination with horizontal line. Material from the high-end to join, heat carrier from the low-end entry, countercurrent contact with material, also have heat carrier and material flow into the cylinder together. With the rotating cylinder materials by gravity run to the lower end. Wet material in the cylinder body move forward, heat by heat carrier directly or indirectly, so that the wet material to be dried, then at the discharge end through a belt or a screw conveyor send out.

Technical Specification

Model	Inclination (%)	Rotation speed (r/min)	Input temperature (ºC)	Main power (kw)	Capacity (t/h)	Weight (t)
Φ600×6000	3-5	3-8	≤700	3	0.5-1.5	2.9
Φ800×8000	3-5	3-8	≤700	4	0.8-2.0	3.5
Φ800×10000	3-5	3-8	≤700	4	0.8-2.5	4.5
Φ1000×10000	3-5	3-8	≤700	5.5	1.0-3.5	5.6
Φ1200×10000	3-5	3-8	≤700	7.5	1.8-5	14.5
Φ1200×12000	3-5	3-8	≤700	11	2-6	14.8
Φ1500×12000	3-5	2-6	≤800	15	3.5-9	17.8
Φ1800×12000	3-5	2-6	≤800	18	5-12	25
Φ2200×12000	3-5	1.5-6	≤800	18.5	6-15	33
Φ2200×18000	3-5	1.5-6	≤800	22	10-18	53.8
Φ2200×20000	3-5	1.5-6	≤800	30	12-20	56
Φ2400×20000	3-5	1.5-5	≤800	37	18-30	60
Φ2800×15000	3-5	1.5-5	≤800	40	20-35	72.5
Φ2800×18000	3-5	1.5-5	≤800	40	25-35	75
Φ3000×20000	3-5	1.5-5	≤800	55	28-40	78
Φ3000×25000	3-5	1.5-5	≤800	75	32-45	104.9

Notes:This parameters are just for reference,which should be changed accordingly.

2012 hot sale silica sand drying machine