1.Led controller wifi RGB DC12V-24V 2.iPhone controller 3.wifi controller Supply power to the wifi controller (power adapter or USB port, DC5V, 500mA).Connect devices (compatible with iOS5.0 or above edition iPhone or iPad) to wifi controller (the default name is wifi-socket).Download our program from Apple App Store, Install it and open the program. Select the remote you need, restart the bulbs’ power, press ‘on’ key once while power on the bulb within 3 sec. the bulb will blink 3 times, it indicate the code match successfully. Congratulations! Now you can operate it by your iphone or ipad to control the lighting.

Security Setting (Optional):

if you want to give the controller a cool name or make it more security, please Implement the follow steps:

Login to management webpage: start safari browser then input 192.168.1.100 in address box.

2.Input the default user name: admin and password: 000000 to connect with it.(you can also change the login wifi controller name and password.)

Then the management webpage will be showed as follows.

3.Change wifi controller’s name and access password

Input a new name to replace the default name wifi-socket

Select an Encryption security type

Enter a password in Encryption Key box according to password type you selected above.

Click save and re-connect the wifi controller by new SSID name.

If you want to cancel the connection or change the installations, just press the re-set key on wifi controllers and hold on 5 seconds. the wifi controller will re-start and recover to factory setting. You can set it again.