Ads by Google
1. 2.4G wifi controller for led strips. 2. Five controller contained. 3.Smart Phone,Iphone,Ipad,Ipod
2.4G RF Adjustable Bulbs/Strip Controllers WiFi Adaptor For Smart Phone
Compatible with all Cytac 2.4G Wireless LED Bulbs&Strip Controllers only.
Product Introduction
Welcome to use WIFI control system Of Cytac. This system is compatible with all the 2.4G led touch controller and lamp produced by Cytac. By operating the software, you can control the led products around.
You only need to slide the mobile or IPAD to achieve the adjustment of led dim and color temperature.
You can adjust various kinds of lighting scene according to your need or mood to enjoy your home life.
Attention: This system operating software temporarily only support Apple products,such as: iphone4,iphone4s,ipod ,ipad,etc. And the system must be IOS 5.0 or above.
Product Specification
1.Indicating Light and Interface Specification
Indicating light from left to right
Indicating light number 1 flickers ,indicating equipment power is on
Indicating light number 2 stays brightall the time, indicating the equipment doesn't connect with mobile.
If indicating light number 3 brights all the time and indicating light number 2 puts out, indicating the connection between the equipment and the mobile is in good condition.
Power interface is the standard USB interface, which is appropriate for all the power supply with DC5V ,5000mA output .
2. Connection normally only shows the communication is good between the equipment and themobile,and also you can login led controller. The control system can be used only after the settings of the controller was complished ,and re-connection isdone.
3.long press reset-switch for 5 seconds, the indicating light number 1 and indicatinglight number 2 flicker alternately, indicating the equipment data is clearedand reset to factory setting.
WiFi Controller,Wifi Adaptor,Wireless Bulb,Adjustable Bulbs,Smart Phone,Iphone,Ipad,Ipod2.4G RF led WiFi lighting controller