Specification of Electric Linear Actuator:
Voltage: 24VDC or 12VDC, Permanent Magnet Motor Drive
Standard Stroke of Electric Linear Actuator: 100/150/200/250/300/350/400 mm, special stroke are available according to customer' requirement.
Max. Thrust of HT Electric Linear Actuator: 2000N, 4000N, 6000N Free Load Speed of Electric Linear Actuator: 5mm/s~13mm/s
Rated Load Speed of Electric Linear Actuator: 5mm/s
Duty cycle of Electric Linear Actuator: 10%
Ambient temperature -25°C (-13F) to +65°C (149F)
Standard protection class of Electric Linear Actuator: IP 44
Built-in integral limit switch, not adjustable after leaving factory
Low noise design, dB<53(A); The inspection method is in accordance with DS/EN ISO3746 while Electric Linear Actuator is unloaded.
CE Certificated Electric Linear Actuator
Standard Stroke of HT Electric Linear Actuator and Min. Install Dimension
Standard Stroke (mm) | 50 | 100 | 150 | 200 | 300 | 350 | 400 | |
Min. Install Dimension | 1000N | 225 | 275 | 325 | 375 | 475 | 525 | 575 |
3000N | 225 | 275 | 325 | 375 | 475 | 525 | 575 | |
6000N | 225 | 275 | 325 | 375 | 475 | 525 | 575 |
Technical Specification of HT Electric Linear Actuator
Item No. | Max. Thrust (N) | Max. Pull (N) | Self-Lock (N) | Speed (mm/s) | Duty Cycle (min/h) | Current at full load(A) | |
Full load | No load | ||||||
1000N | 1000 | 750 | 750 | 40 | 45 | 6 | 6.5 |
3000N | 3000 | 2500 | 3000 | 14 | 16 | 6 | 4.5 |
6000N | 6000 | 4500 | 5000 | 5 | 7 | 6 | 3.5 |
linear actuator