Ads by Google
RY400M Adsorption Dehumidifier
Main parameters:
1.Dehumidifying capacity:60L/D
2.Process Air Volume Rate:420m³/h3.Working Temperature Range:-10°C-+50°C4.Desiccant rotor:proflute5.Power consumption: 2KW6.Voltage:220V7.Heater current:10A8.Area operation:20-50m2
Applications:
The Rui Ya Electric Appliance recommends the use of the RY400M Adsorption Dehumidifier in the following situations:
Food production
Pharmaceutical production, packaging, storage, testing and research
Low dew point conditions
Humidity of less than 35%RHLow temperatures, especially combined with low humiditySingle pass air flow applications
Process air systems Photographic/film archive storesPneumatic conveying of powdersPumping stationsConfectionary production and packingClean roomsElectronics manufactureCold storesSeed storageDrying & corrosion prevention inside power station turbines Injection moulding machinesTank drying
Main Features
1.Accurate camputer contral system
2.Timer function
3.Proflute Rotor, imported from Sweeden, washable
4.Delaytime protection circuit
5.Silence, economical, saving, and easy operation
6.Fault locator system
7.Cleanable air filters helps improve the quality of air being circulated through the system at the processing air entrance&reactivation air entrance
8.Easy installation and checking.
9. 3years long warranty
Principle
The core part of the dehumidifier is cellular structure desiccant rotor, formed by special ceramic fiber composite and silica gel. The rotor is divided into two areas by a seal device, one is process area(dehumidification area), the other is reactivation area. When the dehumidifier is in operation, two streams of air pass through two areas simultaneously. One is the air that will be dehumidified by silica gel in rotor, the other is hot air used to dry the running rotor so that it will be able to remove moisture again. The moisture is taken away by the hot and very humid air steam.
As per the below picture showing:
Ya Ke Dehumidifier, the best choice for air humidity control!