1. Parker/Nok/Hallite Seals 2. 1 year Warranty 3. ISO9001:2008 4. Chrome plating 5. Factory Supply

Hydraulic Cylinder

Our raw material is high quality steel, seamless honed tubes. They are produced with BKS & SRB conditions, and we process them with CNC lathe. The sleeve of cylinder is very smooth, the surface finish can be 0.02μm and the seal kits are Parker imported from USA. So the working life is long and the using frequency can be high.

Before paint, we will process the cylinder tubes with ball blast, so that the painting can be absorbed tightly. Then we will paint the cylinder with one lick of anti-rust paint and two lick of finish paint. Every lick of our paint is thick, so that can protect the cylinder well.

For the package, we will use corrugated paper for each cylinder and use plastic film for several cylinders. At last, use steel case to package them.

Specification:

Model	Working Pressure	Bore Diameter (mm)	Piston Rod Diameter (mm)	Stroke Length (mm)	Minimum Stroke (mm)
HSGL-40/dE	16 Mpa	40	22	1000	Unlimited
HSGL-50/dE		50	28	1000
HSGL-63/dE		63	35	2000
HSGL-80/dE		80	45	2000
HSGL-80/dE		80	45	3000	30
HSGL-90/dE		90	50	3000	40
HSGL-100/dE		100	55	3000	40
HSGL-110/dE		110	63	3000	40
HSGL-125/dE		125	70	3000	35
HSGL-140/dE		140	80	3000	45
HSGL-150/dE		150	85	3000	50
HSGL-160/dE		160	90	3000	40
HSGL-180/dE		180	10	3000	45
HSGL-200/dE		200	110	4000	45
HSGL-220/dE		220	125	4000	50
HSGL-250/dE		250	140	4000	55

Pictures:

Parker Seal Kits, Hydraulic Cylinder for Lifter