Ads by Google
1WG-4.2-LS-L 6.5HP Gasoline Mini Tiller Garden Machine Cultivator
Engine of 1WG-4.2-LS-L 6.5HP Gasoline Mini Tiller Garden Machine Cultivator
Model | 1WG-4.2-LS-L |
Matched engine | SR1P70F gasoline engine |
Max. power | 4.2KW |
Horse power | 6.5HP |
Rotary speed | 3600rpm |
Oil consumption | 0.4L/h |
Matched Blades of 1WG-4.2-LS-L 6.5HP Gasoline Mini Tiller Garden Machine Cultivator
Rotary plow | |
Tilling width | 70cm |
Tilling depth | 15cm |
Tyre code | 3.5-4 |
Wheel base | 310mm |
Ground clearance | 100mm |
Plow depth(cm) | |
Rotary cultivation | 10-17cm |
Ploughing | 8-12cm |
Plow wide(cm) | |
Rotary cultivation | 75cm |
Ploughing | >12.5 |
Package Detailes of 1WG-4.2-LS-L 6.5HP Gasoline Mini Tiller Garden Machine Cultivator
Gross weight | 59Kg |
Packing size(L*WW*H) | 85*60*78cm |
Package type | Carton |
Clutch model | Claw clutch |
Opposite sides of hexagonal shaft output shaft | 23 opposite side |
Safety Instruction and Maintenance of 1WG-4.2-LS-L 6.5HP Gasoline Mini Tiller Garden Machine Cultivator
1. Check whether the height if engine lubricating oil (engine oil) meets the requirement or not before the startup.
2. Check whether the lubricating oil surface of travel case meets the regulated requirement.
3. Check the loosening of connecting bolts of each assembly and solve he found loosening.
4. Check the preparative items according to the requirements of operation instruction of engine.
5. After starting up the engine, grasping the left-hand clutch handle is representative of the implementation of operation and the release is representative of the stop of operation.
6. It is prohibited to start up the engine under the operation of clutch. It is prohibited to stop on the slope with a larger gradient.
7. It is prohibited to remove the mud guard for operation. Observe the warning signs.
8. Get done with the regular maintenance. Clean the travel mechanism after the 500-hour accumulative operation and replace the engine oil after the operation for 1000 hours. Moreover, check the gear, bearing and clutch and exchange for new parts if necessary.
9. Store the machine in the safe place in the door where is ventilated, dry and free from corrosive gas.