jaw crusher for rock to crushing hard big mineral ore
1) The jaw crusher can be put into operationonly when it works normally without load.
2) The stuff should be fed steadily.
3) Temperature rise of bearing should notexceed 35, the maxtemperature should not exceed 70.Otherwise, stop the machine and examine at once.
4) Stop feeding before stopping the motor. Stopthe motor only when all the stuff is discharged from the machine.
5) If the machine is blocked by the stuff, stopthe motor at once. Start up the machine again when the blocked stuff is cleanaway.
6) Clean the bottom of toggle plate andkeep the back of moving jaw clean
1) What's the material you are going to deal with?2) What's the granularity of the material?3) What's the granularity of the final products are you going to achive?4) What's the producing capacity you are going to achieve?
model | Feeding size (mm) | Discharging size (mm) | capacity(t/h) | power(kw) | Outer size (mm) |
PE-250×400 | 400×250 | 20-50 | 5-20 | 15 | 1430×1310×1340 |
PE-400×600 | 600×400 | 40-100 | 15-60 | 30-37 | 1700×1732×1653 |
PE-500×750 | 500×750 | 50-100 | 40-110 | 45-55 | 2035×1921×2000 |
PE-600×900 | 900×600 | 65-160 | 90-180 | 55-75 | 2290×2206×2370 |
PE-750×1060 | 1060×750 | 80-140 | 110-320 | 90-110 | 2655×2302×3110 |
PE-900×1200 | 900×1200 | 95-165 | 220-450 | 110-132 | 3800×3166×3045 |
PE-1000×1200 | 1000×1200 | 195-265 | 315-550 | 110-132 | 3800×3166×3045 |
PE-1200×1500 | 1200×1500 | 150-300 | 400-800 | 160-220 | 3800×3166×3045 |
PEX-150×250 | 150×250 | 10-40 | 1-3 | 5.5 | 896×745×935 |
PEX-150×750 | 150×750 | 18-48 | 5-16 | 15 | 1200×1500×1200 |
PEX-250×750 | 750×250 | 25-60 | 15-30 | 22-30 | 1667×1545×1020 |
PEX-250×1000 | 1000×250 | 25-60 | 15-50 | 30-37 | 1550×1964×1380 |
PEX-250×1200 | 1200×250 | 25-60 | 20-60 | 37-45 | 2192×1900×1950 |
skype zzaixmachine
008618237112105
jaw crusher for rock to crushing hard big mineral ore