Specification: 1.Crusher evenly; 2.24 hours service; 3.Low cost consumption; 4.Can achieve your requirement.

Look!!!High efficiency stone crusher with ISO9001:2008

 

Application of stone crusher:

suitable for crushing medium hardness and brittleness of the material, the material is broken as coal, cement, gypsum, alum, brick, tile, limestone, etc.

Works of principles:

Stone crusher is the main working parts with a hammer (also known as hammer) of the rotor. Rotor from the spindle, disk, pin and hammer components.Motor drives the rotor speed in crusher cavity rotation. Material from the upper feed inlet into the machine, by the high-speed movement of the hammer blow, impact, shear, abrasive and grinding.In the lower part of the rotor, with sieve, crushing in less than sieve size fractions excreted through the sieve, sieve size larger than the coarse-grained material in the sieve retention continue to be a hammer blow and cut, and finally through sieve from the plane.

Wide range of Mining Field:

Technical parameters:

Type	Rotor speed(r/min)	Inlet size(mm)	Maximum feed size(mm)	Out size (mm)	Capacity  (t/h)	Power(kw)	Weigt (t)	Dimensions L×W×H(mm)
Φ400×400	1500	145×450	100	0-30	5-8	7.5	0.9	844×942×878
Φ600×400	1000	295×450	100	0-35	10-12	18.5	1.03	1054×972×1117
Φ600×600	1000	295×570	100	0-35	12-18	45	2.14	1315×840×1501
Φ800×600	1000	350×570	120	0-45	20-25	55	2.45	1515×2586×1040
Φ800×800	1000	350×850	120	0-45	35-45	55	3.05	1515×2831×1040
Φ1000×800	1000	580×850	200	0-45	25-40	110	6.5	3206×2210×1515
Φ1000×1000	1000	580×1060	200	0-45	40-80	132	7.59	3514×2230×1515
Φ1250×800	750	650×850	200	0-45	20-50	132	11.7	2630×1780×2050
Φ1250×1250	750	650×1330	200	0-45	90-110	185	13.2	2630×2180×2050
Φ1400×1400	750	1050×1540	250	0-45	120-170	280	17.2	2790×2800×2310
Φ1600×1600	600	1500×1785	350	0-60	220-280	450	22.8	3350×3120×2660

The main production show:

We had build good and long-term cooperation with customers at abroad:

High efficiency stone Crusher with ISO9001:2008