copper coated steel sheet 1. Material: T2 Copper 2. Thickness: 0.2mm - 2.5mm 3. Width: no more than 600mm copper coated steel sheet Specifications of Copper Clad Steel Sheet1. Thickness (δ): 0.2mm - 2.5mmTolerance of Thickness (Δ1): δ≤0.5mm, Δ1=0.04mm1.0mm≥δ>0.5mm, Δ1=0.06mmδ>1.0mm, Δ1=0.08mm2. Width (w):T2(copper): w≤580mmH65(Brass): w≤450mmTolerance of Width (Δ2): w≤200mm, Δ2=0.5mm400mm≥w>200mm, Δ2=0.8mmw>400mm, Δ2=1.0mm3. Specification:For Coil:Inner Diameter: 508mm/250mm/100mmOutside Diameter: no more than 1400mmFor Sheet: Length: 450mm~800mmProperty of  Copper Clad Steel Strip

Temper	Tensile Strength(N/mm2)	Elongation (%)	Feature
TM	≥280	≥45	Excellent Ductility, suitable for deep stamping
M	≥290	≥33	Good Ductility, suitable for general stamping
Y2	350 - 450	≥5	Used to manufacture bending parts
Y	≥460	-	Used to manufacture simple bending part
TY	≥650	-	High Strength and Flexibility

  Manufacturing of  Copper Clad Steel SheetWe use sand paper to polish the surface of copper and steel. Then, mill imposes 130T pressure on the copper and steel to make them cohesive. Next step is the anneal procession, in which big annealing furnaces are applied. Finally, slitting machines slit large coils into the strips you want.Testing Equipment for  Copper Clad Steel SheetWe have a professional testing center where is settled with advanced equipment to analyze properties of copper steel, such as Rockwell hardness tester and peel force tester. Packaging of  Copper Clad Steel SheetCoils are put into the plastic bags first then waterproof paper closely wraps the coil. In case of wet during the long journey, we put desiccant in the outside plastic package. Applications for  Copper Clad Steel Sheet1) Bullets2) Cartridges3) Electronic stamping4) Electronic hardware5) Decoration 6) Radiators7) Drawing parts8) Covering parts 9) Connectors10) Heat Exchanger