1. HDBaset Technology 2. with 3D & 4kx2k 3. 328feet/100m 4. One Cat5e/6 cable 5. DC5V
Model No.: SX-EW11
Features:
1).Incorporates HD Base-T technology 2).Following North American wall plate standard(2 Gang indoor outlet) 3).Full HD support: 1080p@60Hz@48 b/pixels, 4Kx2K and support 3D 4).Extends HDMI and IR up to 328 feet (100 meters) using one CAT5e (or better) cable 5).With Infrared control signal passing through function 6).Supports high bit-rate audio formats (Dolby True-HD / DTS Master Audio) 7).Both inner and outer power connectors provided 8).UTP cable termination follows the standard of IEEE-568B 9).CEC Pass_Through 10).DC 5V power supply
Specifications:
Model No. | SX-EW11 |
Operating Temperature Range | -5 to +35 degree C (+23 to +95 degree F) |
Operating Humidity Range | 5 to 90%RH (No Condensation) |
Video Bandwidth | 300MHz/9Gbps |
Video Forma Supported | Up to 1080P and 4kx2k |
Connectors | HDMI receptacle RJ45 Power connector terminal Power DC receptacle IR Blaster |
Transmission Distance | 1080P 328feet/100m over single Cat5e/6 cable |
RJ45 Pin Configuration Reverse Polarity Sensitive Use EIA/TIA 568B, straight-through wiring | |
Power supply | 110-240V/5VDC |
Power Consumption | 3Watts (TX), 5Watts(RX) |
Enclosure | ABS fire retardant plastic |
Dimensions | W11.5xH114.5xT32.5mm |
Weight | (TX) 120g, (RX)120g |
Picture:
Packing contents:
Transmitter x 1pcs |
Receiver x 1pcs |
IR-TX cable x 2pcs |
IR-RX cable x 2pcs |
DC5V/2A x 2pcs |
Operating Instructions x 1pcs |
Wiring diagram:
Certificates:
ISO9001, CE, FCC
Adopters of HDMI & HDBaset Alliance:
Wallplate HDBaset HDMI Extender with 3D and 4kx2k support