Ads by Google
Tap connector for power distribution
Type:JMA-2
Main:35-150
Branch:35-150
Steps of easy installation
1,Open ths cap position so as to suit the direction of approach of the branch conductor.
2,Put the branch wire into the cap shealth competely.
3,Arrabge the position of the connector on the main conductor.
4,Tighten the nut by hand,and fix the conncetor in suitable location.
5,Screw the nut with the sleeve spanner.Don't use the open ended spanner!
6,Screw the nut continually until the top part dropped down.
Specifications
CAT.NO. | MAIN(mm2) | BRANCH(mm2) | PIERCING DEPTH(m) | RATING CURRENT(A) | WEIGHT(g) | PACKAGE(PCS/CTN) |
JMAEP | 4-50 | 1.5-10 | >=3 | 70 | 50 | 300 |
JMAEP | 6-95 | 1.5-10 | >=3 | 70 | 52 | 300 |
JMA2-95 | 16-95 | 4-35(50) | >=3 | 200 | 182 | 100 |
JMA2-150 | 50-150 | 4-35(50) | >=3 | 200 | 188 | 100 |
JMA2-185 | 50-185 | 6-16 | >=3 | 200 | 188 | 100 |
JMA3-95 | 25-95 | 25-95 | >=3 | 207 | 210 | 100 |
JMA185 | 50-185 | 50-150 | >=3 | 504 | 350 | 40 |
JMA4-150 | 50-150 | 50-150 | >=3 | 239 | 220 | 100 |
JMA240 | 95-240 | 95-240 | >=3 | 239 | 310 | 60 |
JMA400 | 120-400 | 95-240 | >=3 | 679 | 800 | 40 |
JMA6 | 120-240 | 16-120 | >=3 | 239 | 310 | 60 |
JMA-1 | 35-70 | 6-35 | >=3 | 200 | 150 | 300 |
JMA-2 | 35-150 | 35-150 | >=3 | 207 | 180 | 300 |
Tap Connector for Power Distribution