Ads by Google
cat5e cable in pull box 305m 4 pair cable used in voice and data cabling system :
Product Description
1. Standards
UTP Cat 5e CableStandards:ANSI/TIA/EIA-568-B Category 5eISO/IEC-118012.Construction:
UTP Cat5e Cable
1)Conductor: 24AWG(0.51mm)
2)Insulation: HDPE
8Cores/4pairs 0.92-0.98mmPair 1: Orange/ White OrangePair 2: Blue/ WHite BluePair 3: Green/ White GreenPair 4: Brown/ WHite Brown)3) Rip Cord: Yes&Optional
4)Jacket: PVC/LSZH
3.Electrical characteristics :
Electrical characteristics for Cat5e UTP Property | Nominal Value | Tolerance | Unit |
Characteristic impedance @ 100 MHz | 100 | ± 15 | Ω |
Nominal characteristic impedance @ 100 MHz | 100 | ± 5 | Ω |
DC-Loop resistance | ≤ 0.188 | Ω/m | |
Propagation speed | 0.64 | c | |
Propagation delay | 4.80-5.30 | ns/m | |
Delay skew < 100 MHz | < 0.20 | ns/m | |
Capacitance at 800 Hz | 52 | pF/m | |
Corner frequency | ≤ 57 | kHz | |
Max tensile load, during installation | 100 | N | |
Wire size | AWG-24 (0.205 mm² ) | ||
Insulation thickness | 0.245 | mm | |
Maximum current per conductor | 0.577 | A | |
Temperature operating | -55 to +60 | °C |
4.:Frequency
FrequencyMhz | Impedanceohm | RL≥dB | Attenuation≤dB/100m | NEXT≥dB/100m |
1 | 100+15 | 20.0 | 2.0 | 74.3 |
4 | 100+15 | 23.0 | 4.1 | 65.3 |
10 | 100+15 | 25.0 | 6.5 | 56.3 |
16 | 100+15 | 28.0 | 8.2 | 50.3 |
20 | 100+15 | 31.0 | 9.3 | 47.8 |
31.25 | 100+15 | 23.6 | 11.6 | 48.9 |
62.5 | 100+15 | 21.5 | 17.0 | 38.4 |
100 | 100+15 | 20.1 | 22.0 | 35.3 |
Category 5e cable, it also is rated for up to 100 MHz frequencies.
Additional performance standards enable it to support transmission speeds of up to 1000 mbps
("gigabit Ethernet").