MPC6610 is designed for the open-loop motion control system which is in the CNC routing machine exclusively.

 MPC6610 is designed for the open-loop motion control system which is in the CNC routing machine only. Based on DSP and FPGA technology, the advanced velocity look-ahead and trajectory blending algorithm ensure the velocity invariableness and transition smoothness between any two-trajectory segments during the high speed X-Y continuous trajectory motion. The G code could be processed by the tools, such as ArtCam and Type3 and transferred to the controller for working.

Applications

CNC routing machine exclusively, open-loop motion control system. Typical machining materials are wood and plastic.

Features:

l         Stand-alone

l         3-axis linear interpolation

l         Velocity look-ahead and trajectory blending

l         Output frequency 7.5MHz

l         Tool setting automatically

l         S-profile acceleration and deceleration

l         Embedded 256MB memory

l         Support NC, mmg and U00 format files

l         Max 6 coordinate system

l         Embedded horizontal and vertical milling functions

Functionality

l        Maser and slave USB ports enables machine working without PC

l         3-axis interpolation makes arc surface smoothly

l         “pre-work-check” makes sure material size will not exceed the working table

l         3-axis leaner interpolation

l         Power-off-point resume

l         Max 6 breakpoints resume

l         Max 8 transducer varient speed control

l         Working resolution is subject to the driver in the stepping motor system

Working Environment

Temperature: 0-60°C

Humidity: 5-90%, non condensing.

The Connection Pin Definition – P50

Group	Pins
	1	2	3	4	5	6
POWER1	Input 24VDC+	GND	-	-	-	-
X1	X-axis Limit+	X-axis Limit-	Y-axis Limit+	Y-axis Limit-	Z-axis Limit+	Z-axis Limit-
X2	X-axis Home	Y-axis Home	Z-axis Home	U-axis Home	GND	Output 24VDC+
X3	IN1	IN2	IN3	IN4	GND	-
Y1	X-axis Pulse	X-axis Dir	Output 5VDC+	-	-	-
Y2	Y-axis Pulse	Y-axis Dir	Output 5VDC+	-	-	-
Y3	Z-axis Pulse	Z-axis Dir	Output 5VDC+	-	-	-
Y4	U-axis Pulse	U-axis Dir	Output 5VDC+	-	-	-
Y5	OUT1	OUT2	OUT3	OUT4	GND	-
Y6	SP0	SP1	SP2	SP+	GND	-
J1	50-pin cable connector

Packing List

Model	Description	Quantity (pc)	Pack Size (mm)*	Net Weight (Kg)	Type
MPC6610	Motion Control Board	1	110*202*35	0.38	Standard
P50	Breakout Board	1	190*100*20	0.17	Standard
C50-3M	Cable connects MPC6610 and P50	1	Length 3000	0.50	Standard
Udisk	USB Flash Drive, 4GB	1	-	-	Optional

* Some products may not have dedicated packagings.

MPC6610, CNC Router Motion Controller